User Guide
Table Of Contents
- User Guide
- Contents
- Safety and warnings
- Safety features
- Control panel
- Wash cycles
- Detergent and softener
- Wash preparation
- Getting started quickly
- Customising a wash cycle
- Changing pre-set options
- Factory reset
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Energy consumption and cycle times
- Manufacturer’s warranty
- Customer care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
10
To turn your washer on if KEYLOCK is ON and the washer is powered OFF:
Keylock
To turn
KEYLOCK ON or OFF when the washer is powered on:
Add a Garment
Enables you to add or remove items during the wash stage of the cycle, under
certain conditions.
CONTROL PANEL
Press ADD A GARMENT, wait until you hear
the door unlock.
1
Press for three seconds.
When activated,
is illuminated.
Open the door and add or remove items.
Close the door and press
to restart
the cycle.
2
Press POWER , then press and hold
for three seconds. This will activate the
control panel. Wash cycles and options can
now be selected.
If a button is pressed while
KEYLOCK is
activated, beeps will be heard and
will flash.