6. RUG. Z882 8:59 BELCH-B DOLT 26767734 MNO. 858 Pl B8/9/0% 4:35 PM Page rep gad Lye . Calming Vibrations Monitor Model Number; 71644 For proper set-up and use, please read these instructions. Please keep this instruction sheet for future reference, as it contains important information. Transmitter is electrically powered. Crib soother is powered hy three “D” alkaline batteries (not included). Remote control receiver is powered by the AC adapter (included, plugs "into standard household outlets 120V AC).
16. RUG. Z882 8:59 BELCH-B DOLT 26767734 71644pr-0920 8/3/0% 4:35 EM Page 2 & IMPORTANT! ~~ This product cannot replace responsible adult supervision. » This product is not intended to be used as a medical monster and its use should not replace adult supervision. Test sound reception of remote control receiver before first-time use and whenever yau change location of transmitter. To prevent entanglement: Never place transmitter in a crib or playpen.
16. RUG. Z882 8:59 BELCH-B DOLT 26767734 71644pz-0920 8/9/06: 4:35 PM Page 3 = Calming Vibrations Monitor Listen and respond to baby with calming vibrations and sounds. Transmitter guy Remote Control _— Crib Se other Receiver — Transmitter Place ir baby's room ar play area to transmit sounds to the remote control receiver. Transmitter operates on AC current. Remote Control Receiver Listen and respond to baby from anywhere around the home.
16. RUG. Z882 8: BELCH-B DOLT 26767734 8/3/02 4:35 PM Page RA Consumer Information Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replacement parts. Please call Fisher-Price? Consumer Relations, toll-free at 1-800-432-5437, between EST, Monday through Friday.
16. RUG. Z882 9:88 BELCH-B DOLT 26767734 71644pr-092a 8/9/02 4:35 BM Age < Assembly This package contains small parts in its assembled state. Adult assembly is required. Crib Loather Slot + Lock Nut Rounded Side Qut {ppm M3 x 1" Screw + Fit the bolt nits the slot on the back of the cribs soother. + Insert the screw into the hole in the crib soother, as shown. + Fit the lock nut, rounded side out, into the hexagonal opening on the crib soother, as shown.
16. RUG. Z882 9:88 BELCH-B DOLT 26767734 71644pr-0320 8/9/02 4:35 BM Page id Remote Control Receiver Battery Installation (Optional) The remote control receiver operates using the enclosed AC adapter or battery power. 9V (6LR&1) Shown Actual Size Compartment Door + Locate the battery compartment door on the back of the remote control receiver. * Loosen the screw in the battery compartment door with a Phillips screwdriver, Lift to remove the battery compartment door.
16. RUG. Z882 9:88 BELCH-B DOLT 26767734 MNO. 858 PY 71644pr-0920 3/5/02 4:35 FY Page 2 . 15Vx3 “D” (LR) men door an the back of the crib soother. = Loosen the screws in the battery compartment door with a Phillips screwdriver. Lift to remove the battery compartment door. = Insert three “D” alkaline batteries as indicated inside the battery compartment. » Replace the battery compartment door and tighten the craws with a Phillips screwdriver. Do not over-tighten.
16. RUG. Z882 9:88 BELCH-B DOLT 26767734 MNO. 858 P.8 71644pr-0920 8/8/02 4:35 PM Age th Battery Tips « Remove the batteries during long periods of non-use. Always remove exhausted batteries from the product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. = Do not dispose of the batteries in a fire. The batteries may explode or leak. Never short circuit the battery terminals. Nonchargeable batteries are not to be recharged.
16. RUG. Z882 9:81 BELCH-B DOLT 26767734 71644pz-0820 8/3/02 4:35 PM Page 2 Testing Sound Reception a BT Test transmitter transmission and remote control receiver reception. Channel Switch Power Switch Set the channel switch on the transmitter to the same channel as the remote control receiver Place the transmitter in the room in which you intend to use it. Slide power switch on. Tum on a radio. will also hear static noise.
£.18 16. RUG. Z882 9:81 BELCH-B DOLT 26767734 71644pr-0520 8/3/02 4:35 BM Page toy ki] Attach Crib Soother fo Crib Rail | = Outside View rl = Fit the crib soother on top of the crib rail so that it faces baby. Hint: The speaker is located on the fro reception, we recommend placing the cit Side View ib soother. For best sound oer so that the speaker faces baby. + Fit the clamp to the end af the bolt on the crib soother.
16. RUG. Z882 9:81 BELCH-B DOLT 26767734 71644pr-0920 8/5/02 4:35 FM Page uh Setup & Use transmitter Dome Has, 2 L Crib Soother Dome ® x Place the transmitter in the same room with the baby. Point the transmitter microphone directly toward the crib or play area. The transmitter i and the crib soother should be no more than 15 feet from each other. FE D Align the arrow on the transmitter dome with the arrow on the crib soother dome.
16. RUG. Z882 9:81 BELCH-B DOLT 26767734 P12 71644pr-0820 6/3/02 4:35 BM Page 12] Setup & Use b Transmitter Rotgut Control Crib soother + ole u Receiver IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 9).
16. RUG. Z882 9:82 BELCH-B DOLT 26767734 71644pr-0820 8/5/03 4:35 FM Fags uh | Set the transmitter channel switch to the same channel as the remote control receiver, Unwrap and fully extend the transmitter power cord far best transmission. Insert the power cord plug into the wall outlet. Slide the transmitter power switch on. The power indicator lights. 6 .
16. RUG. Z882 9:82 BELCH-B DOLT 26767734 MNO. 858 P15 71844pr-0820 B/13/2z 1:02 BM Page 3 Setup & Use El Place the remote control receiver where you will see or hear it, Unwrap and fully extend the AC adapter cord for best reception. Insert the AC adapter jack into the remote control receiver socket and plug into the wall outlet. Note: To use a 9Y alkaline battery as a power source, refer to “Remote Control Receiver Battery installation” instructions on gaps 6.
. RUG. Z882 9:83 BELCH-B DOLT 26767734 MNO. 858 P.16 8/8/02 4:35 PM Page dy OTT 2 To soothe baby. press and hold the soothing button on the remote control receiver for about two seconds. The green light on the front of the crib soother turns on and baby enjoys vibrations/sounds. The crib soother will turn off after approximately 10 minutes and the green light turns off.To turn it back on, simply press and hold the soothing button on the remote control receiver for about two seconds.
16. RUG. Z882 9:83 BELCH-B DOLT 26767734 71844pr-0920 8/3/02 4:35 EM Page Es Setup & Use ~~ 12 To tum the crib soother off, press and hold the soothing button on 3 the remote control receiver for about two seconds. IMPORTANT! It takes a few seconds for the crib soother to receive a signal from the remote control receiver. Be sure ta press and hold the soothing button on the remote contra receiver for about two seconds.
16. RUG. Z882 9:83 71644pr-0920 6/3/02 BELCH-B DOLT 26767734 4:35 PN Page 18-h ei Problems & Solutions PROBLEMS Transmitter power indicator not lit. remote control receiver. Transmitter power indicator not fit. Transmitter power indicator not lit. Transmitter power indicator not fit. You hear static or buzzing control receiver. You hear static or buzzing from and all five tads [it on remote SOLUTIONS Turn transmitter power on. Power indicator lights.
16. RUG. Z882 9:84 BELCH-B DOLT 26767734 | 72645pr-as20 8/9702 4:35 BM Age 30 | Problems & Solutions : EE] [11] HH] [ITH {ITI ITT EL] 5 —tp— TTT HITTITE COE] TIT CHIT PROBLEM You can hear conversations or sounds from other homes. P.
16. RUG. Z882 9:84 BELCH-B DOLT 26767734 71644pr-0528 8/3/02 4:35 PM Pass a [fT] [1 CITE TTT ILE SOLUTION There is signal interference due to other nursery monitors on same channel or cordless telephone use. Change channel switches on both transmitter and remote control receiver to eliminate source of interference. Hints: Do not use more than one tarn. in same household. Always remember that you are 1 your monitor. Conversations, evil a) lite waves.
16. RUG. Z882 9:84 71644pr-0920 98/5/02 4:35 EM Page is Problems &Solutions BELCH-B DOLT 26767734 “Unholy, mash I} should mows closer 1 the haws" PROBLEM You hear static or buzzing because remote control receiver is out of range of transmitter, Hint: if you cannot hear your child ar control receiver battery is weak Sepia afresh, 9Y alkaline battery of USE the SOLUTION Move remote control receiver closer to transmitter.
16. RUG. Z882 9:85 BELCH-B DOLT 26767734 MNO. 858 P.23 71644pr-0920 8/s/o2 4:35 BM Page 2 Care Excess dirt in the transmitter and the remote control receiver microphone will ~ hamper transmission of sound. Clean outer surface of the transmitter, soother and cremate control receiver with a cloth lightly dampened with a mild cleaning solution. Never immerse the transmitter, soother, remote control receiver or the AC adapter.
P.24 16. RUG. Z882 9:85 BELCH-B DOLT 26767734 6/9/32 4:35 DM Page op Fisher Price, Inc. 2 subsidiary of Mattel Inc. East Aurora, New York 14052, USA, 82002 Mattel, Inc. All Rights Reserved. © and ™ designate Us. trademarks of Mattel, Ing.