Cradle Swing Cradle Swing Model Number: 79595, 79596 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools needed for assembly: Phillips Screwdriver and Adjustable Wrench (both not included). Requires three “D” (LR20) alkaline batteries for operation (not included). Maximum Weight Limit: 24 lbs. (10.9 kg.) The maximum weight limit for this product is 24 lbs. IMPORTANT! If your child weighs less than 24 lbs.
Warnings and Caution WARNING CAUTION • To prevent falls, never use with an active child who may be able to climb out of the seat. • Never leave child unattended. • To prevent injury or death from falls or sliding out, always use restraint system. Never rely on the tray to restrain child. This product contains small parts in its unassembled state. Adult assembly is required. Parts Motorized Frame #8 x 1/2" Pointed Screw - 2 Activity Toy Bar 2 Upper Legs Tray 2 Elbow Feet M4 x 31.
Assembly IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Lower Leg #8 x 3/4" Pointed Screw - 2 SHOWN ACTUAL SIZE Elbow Foot Lower Leg Long Portion 1 Cup Side Down Foot Elbow Foot 3 Correct Incorrect • Stand each lower leg upright, as illustrated.
Assembly Hole Tubes Motorized Frame Battery Compartment 5 Hole Feet Feet L • Position the motorized frame so that the battery compartment is toward you. • Position the tubes in the motorized frame so that they are toward the outer edges. The holes in the tubes should be visible through the notches in the motorized frame. L R 7 • Stand the assembly upright. All four feet should be flat upon the floor.
Assembly Elastic Loop Peg Seat Tube Arm Hole Peg Elastic Loop 9 Seat Tube Button Bottom View 11 • While holding the elastic loops in place, turn the seat face down. • Hook the elastic loop on the left side onto the peg on the right side. • Hook the elastic loop on the right side onto the peg on the left side. • While pressing the button on the seat tube, slide the seat tube arm onto the seat tube. Make sure the button on the seat tube “snaps“ into the hole in the seat tube arm.
Assembly Toy Bar Button Tray Slot Mobile 13 Slot 15 • Turn the seat upright. • Insert the tray tabs into the slots in each side of the seat. • Insert the ends of the toy bar into the holes in the tray. Press down on the ends of the toy bar to be sure they are secure. Seat Tube Button 14 • Slide the button on the top of the mobile into the slot in the motorized frame. Assembly is now complete. Motorized Frame Tube Hole M4 x 31.
Battery Installation + 1.5V x 3 “D” (LR20) Battery Tips • Do not mix old and new batteries. • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Remove the batteries during long periods of non-use. Always remove exhausted batteries from this product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. • Do not dispose of batteries in a fire. The batteries may expolde or leak.
Cradle and Swing Use Your Cradle Swing changes from a traditional swing to a rocking cradle at the push of a button! To Unfold IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Button Button Leg Leg 1 • Firmly pull the legs outward.
Cradle and Swing Use Power Settings Restraint Belts Power Dial Waist Belt Waist Belt 4 2 Crotch Belt To start: • Turn the power dial to the medium setting. The power indicator lights. • Give the seat a light push to start the swinging motion. Adjust the power dial to the desired swing motion setting: low, medium or high. • Place your child in the seat. • Pull the crotch belt up between your child’s legs and fasten both waist belts to the crotch belt. Make sure you hear a “click” on both sides.
Cradle and Swing Use Storage Adjust Positions Seat Tube Button Seat Tube Button 6 Button 8 • Press the buttons on the back of the motorized frame while pushing the legs inward. Cradle Swing Swing You can adjust the seat tube to three different positions: • Press the seat tube button to unlock the seat tube. • Rotate the seat tube to the desired position. Adjust to Recline or Upright Positions Front Edge of Seat Upright 9 Recline 7 • Lean the Cradle Swing frame against a wall for storage.
Problems and Solutions Condition Power indicator does not light, motor is not running Motor is running but swinging stops after a few minutes No difference noticed in swinging motion after power dial is adjusted Probable Cause Correction Required Power is not on Turn the power dial to low, medium or high. Batteries incorrectly installed Remove the batteries and replace in correct orientation, as illustrated in the battery compartment.
Care One (1) Year Limited Warranty • Remove the tray from the seat. • Unbuckle the restraint system. • Remove the pad elastic loops from the pegs and unfasten the pad fasteners from the seat. • Remove the pad from the restraint system. • Machine wash the pad in cold water with a mild detergent. Do not use bleach. Tumble dry on low heat and remove promptly. • To clean the seat, restraint system, tray, toy bar, mobile and motorized frame, use a mild cleaning agent and damp cloth.