Healthy Care High Chair ™ Product features and decoration may vary from the photo above. Model Number: 79638, 79639, 79640, 79641, B2875 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). ib Discover what ’s poss le … ™ ishe f . w ww r- e.
Warnings and Caution Consumer Information Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replacement parts. Please call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.
Parts Pad Food Tray Seat Back Base Tray Seat Bottom Frame Hinge Rod #10 x 7/8" Black Screw Storage Caddy #8 x 3/4" Screws 2 Seat Bottom Tubes 3/4" #8 x Screws 4 Screw Retainers #10 x 7/8" Black Screw - 4 #8 x 3/4" Screws Frame Footrest Back Base Front Base #10 x 7/8" Black Screws #8 x 3/4" Screw - 8 SHOWN ACTUAL SIZE #10 x 7/8" Black Screw - 7 SHOWN ACTUAL SIZE 3
Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Seat Bottom Tubes Footrest Plastic Rings Seat Bottom Plastic Rings 3 • Align the holes in the plastic rings and the seat bottom tubes.
Assembly Frame Leg Seat Back Pin Seat Back Pin Opening Opening 7 Seat Bottom Assembly • Pull the frame leg out on each frame to open. Make sure it “clicks” into place. 5 • Turn the seat bottom assembly upright. • Fit the seat back pins into the openings in the top side of the seat bottom assembly. Short Leg Tube #10 x 7/8" Black Screw SHOWN ACTUAL SIZE Back Base Hinge Long Tapered Leg Tube Hinge Rod 8 6 • Turn the seat assembly face down.
Assembly Frame Decorated Side Seat Height Adjusters Position 4 Frame Back Legs Press Lever 10 Back Base Hole • While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. Screw Retainers 9 Back Base Hole #10 x 7/8" Black Screw - 2 SHOWN ACTUAL SIZE Seat Assembly Screw Retainer - 2 • • • • Position a frame so that the decorated side is outward. Insert the back leg of a frame into the back base.
Assembly Push Seat Height Adjuster Push Seat Height Adjuster Front Leg Hole 13 Seat Bottom Tube Ends Screw Retainers #8 x 3/4" Screw - 2 • Push each seat height adjuster SHOWN ACTUAL SIZE to be sure they are completely on the seat bottom tubes. • Insert a #8 x 3/4" screw through each seat height adjuster and the ends of the seat bottom tube. • Tighten the screws with a Phillips screwdriver. Do not over-tighten.
Assembly Pad Slot Elastic Loops Hole Crotch Belt Hole 16 • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. Front View Tabs Elastic Loops 15 Back and Bottom View • Lift the assembly upright. • From the front of the assembly, place the pad onto the seat. • Lift the bottom of the pad. Insert the two elastic loops on the pad through the holes in the seat bottom. • From the back and bottom of the seat, hook the elastic loops to the tabs on the seat.
Assembly Upper Shoulder Belt Slots Shoulder Portion Shoulder Portion 17 Lower Shoulder Belt Slots • Fold the top of the pad down. • Remove the shoulder portion of the waist/shoulder belts by feeding them through the slots in the seat back. 18 • Lift the top of the pad. • Thread the waist/shoulder belts through the bottom slots in the back of the seat pad.
Assembly Securing Your Child Handle IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Pad Strap Elastic Loop Elastic Loop WARNING Tab Prevent serious injury or death from falls or sliding out.
Securing Your Child Anchored End Anchored End A B A B Free End Free End Buckle 2 Tighten Loosen To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop A . • Pull the free end of the waist belt B . • Repeat this procedure to tighten the other waist belt. To loosen the waist belts: • Feed the free end of the waist belt up through the buckle to form a loop A . • Enlarge the loop by pulling on the end of the loop toward the buckle.
Using the Trays Hint: The base tray can be adjusted for your child’s comfort two ways (see steps 7 and 8)! WARNING Prevent serious injury or death from falls or sliding out. The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair.
Using the Trays Hint: The base tray can be removed two ways (see steps 9 and 10)! Food Tray Base Tray Base Tray Squeeze Latch Squeeze Latch 11 9 • Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. • Squeeze one or both of the latches underneath the base tray and lift. Base Tray Release Bar 10 • While pushing the release bar on the front of the base tray, pull the tray base towards you and remove.
Adjusting the Seat Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. WARNING Prevent serious injury or death from falls or sliding out. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted.
Storage Pull Frame Release Latch Base Tray Hole Peg 15 14 • With the legs all the way open, lower the seat to position 1 (the lowest position). • Pull the frame release latches forward and push the rear legs toward the front legs. • Fit the holes on the base tray latches onto the pegs on the back of the high chair frame.
Care • The pad and headrest are machine washable. Wash the pad and headrest separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the base tray. • The food trays are dishwasher safe. Simply remove the food tray from the base tray and place in your dishwasher.
