Instruction Sheet

Assembly
10
• Position the lights ‘n sounds tray on a flat surface, with the
roller facing you.
• Position the mirror base, with the mirror toward you.
• Fit the mirror base onto the lights ‘n sounds tray.
26
• Turn the assembly over. Insert four #8 x 1
1
/4" screws
through the bottom of the lights ‘n sounds tray and
into the mirror base.Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Assembly is now complete.
27
Mirror Base
Lights ‘n
Sounds Tray
• Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
25
Elastic
Loop
Elastic
Loop
#8 x 1
1
/4 ” Screw - 4
Shown Actual Size
Battery Installation
• Locate the battery compartment door on the swing frame.
• Insert a coin into the battery compartment door and pry the
battery compartment door off of the swing frame.
• Insert four “D” (LR20) alkaline batteries as indicated inside
the battery compartment.
• Replace the battery compartment door.
Battery
Compartment
Door
Swing
Hint: We recommend using alkaline batteries for longer
battery life.
B1637pr-0920 7/25/02 8:37 PM Page 10