Motorized Toy Car User Manual

14
L6349pr-0921
• Insert three, black #8 x
3
/4" screws into the back of the seat
and tighten.
Note: You will need to remove these three screws if you change
the seat position.
20
• Turn the vehicle over.
• Insert two #8 x
3
/4" screws through the vehicle and into the
rear deck. Tighten the screws.
21
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Insert the straight end of the steering column down through
the hole in the vehicle floor and out through the hole in
the dash.
22
• Insert the curved end of the steering column though the hole
in the steering linkage.
23
Steering
Column
ASSEMBLY
Steering Linkage
BACK VIEW
BOTTOM VIEW
Steering Column
Steering ColumnSteering Column