Instruction Sheet

Installation Instructions
• Fit the prongs on the matching
peg cover into the outer sockets
in the assembled cover.
3
• Insert two #8 x ¾˝ (1,9 cm)
screws into the peg cover
and tighten with a Phillips
screwdriver. Do not over-tighten
the screws.
#8 x ¾˝ (1,9 cm)
Screws
Peg CoverPeg Cover
Prongs
4
Installation Instructions
BACK VIEW
Hint: Each set of peg covers
includes a side with sockets
and a side with prongs. For this
step you will use a peg cover
with sockets.
• Fit the center socket on a peg
cover to a tray storage peg.
• From the back of the high chair,
locate the tray storage pegs on
the back legs.
Note: While your high chair
may look different than the one
shown, the tray storage pegs are
located only on the back legs in
approximately the same location.
2 3
2
1
Tray Storage
Peg
Peg Cover
Center Socket
Tray Storage Tray Storage
PegsPegs