Instruction Sheet

ManualsBrandsFisher-Price ManualsToysFisher-Price CHN02

X7046, Y7872, BML88

BMM20, CHN02

fisher-price.com

IMPORTANT! Please keep these

instructions for future reference.

• Please read these instructions before

assembly and use of this product.

• Adult assembly is required. Tool needed

for assembly: Phillips screwdriver

(not included).

• Requires one D (LR20) alkaline battery

(not included) for soother operation.

Requires three button cell (LR44)

batteries (mercury-free batteries included)

for toy operation.

¡IMPORTANTE! Guardar estas

instrucciones para futura referencia.

• Leer estas instrucciones antes de

ensamblar y usar el producto.

• Requiere ensamblaje por un adulto.

Herramienta necesaria para el montaje:

desatornillador de cruz (no incluido).

• El mecanismo relajante funciona con 1 pila

alcalina D (LR20) x 1,5V (no incluida).

El juguete funciona con 3 pilas de botón

AG13 (LR44) x 1,5V (pilas sin

mercurio incluidas).

Summary of content (16 pages)

PAGE 1
X7046, Y7872, BML88 BMM20, CHN02 IMPORTANT! Please keep these instructions for future reference. • Please read these instructions before assembly and use of this product. • Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). • Requires one D (LR20) alkaline battery (not included) for soother operation. Requires three button cell (LR44) batteries (mercury-free batteries included) for toy operation. ¡IMPORTANTE! Guardar estas instrucciones para futura referencia.
PAGE 2
CONSUMER ASSISTANCE AYUDA AL CONSUMIDOR 1-800-432-5437 (US) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers/Clientes con problemas auditivos 1-800-382-7470. Centro de Servicio en México: 59-05-51-00 Ext. 5206 ó 01-800-463-59-89 ARGENTINA Mattel Argentina, S.A., Curupaytí 1186, (1607) – Villa Adelina, Buenos Aires. Tel.: 0800-666-3373. COLOMBIA Mattel Colombia, S.A., Calle 123#7-07 P.5, Bogotá. Tel.: 01800-710-2069. PERÚ Mattel Perú, S.A., Av.
PAGE 3
Consumer Information Información al consumidor WARNING To prevent serious injury or death: • Fall Hazard – Never use on any elevated surface, since child’s movement may cause product to slide or tip over. Use only on a floor. • Suffocation Hazard – Never use on a soft surface (bed, sofa, cushion) since product can tip over and cause suffocation in soft surfaces. • Always use restraint system until the child is able to climb in and out of the product unassisted.
PAGE 4
Consumer Information Información al consumidor • Usar un paño humedecido en una solución limpiadora neutra para limpiar el armazón, barra de juguetes y juguetes. No usar blanqueador. No usar limpiadores fuertes o abrasivos. Enjuagar con agua para eliminar cualquier residuo. No sumergir el armazón, barra de juguetes ni los juguetes. Para quitar la almohadilla: • Desabrochar las hebillas alrededor de cada riel lateral. Colocar el asiento cara abajo sobre una superficie plana.
PAGE 5
Parts Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. ¡IMPORTANTE! Sacar todas las piezas del empaque e identificarlas antes de ensamblarlas. Quizá algunas piezas estén en la almohadilla.
PAGE 6
Assembly Seat Back Tube Tubo del respaldo Montaje Press Tabs Presionar lengüetas Foot Pataa 2 Side Rail Sockets Conexiones de los rieles laterales Side i Rail Riel lateral • Slide the socket on a foot onto the tapered end of a side rail. Button Botón • Deslizar la conexión de una pata en el extremo angosto de un riel lateral. 1 • Position each side rail so that the button faces outward.
PAGE 7
Assembly Montaje • Ajustar la clavija del interior de la pata en el orificio del extremo del riel lateral. Atención: Cada pata está diseñada para ajustarse en los rieles laterales de una manera. Si una pata no se ajusta correctamente, quitarla y montarla en el otro riel lateral. • Repetir este procedimiento para ensamblar la otra pata en el otro riel lateral. • Con la unidad de vibraciones apuntando hacia adelante, ajustar las muescas de la unidad en los rieles laterales, tal como se muestra.
PAGE 8
Assembly Montaje • Introducir un tornillo M5 x 30 mm en la parte exterior de cada riel lateral y en los extremos de la barra transversal. ¡IMPORTANTE! Seguir cuidadosamente el siguiente paso de montaje (paso 8) para asegurar por completo la barra transversal en los rieles laterales. Cross Brace Barra transversal a 6 • Fit the cross brace between the side rails, as shown. Hint: The cross brace is designed to fit one way. If it does not seem to fit, turn it around and try again.
PAGE 9
Assembly Montaje Pad Almohadilla ll Pad Lower Pocket Funda inferior de la almohadilla Seat Back Tube Tubo del respaldo Opening Orificio 11 9 • Fit the lower pocket on the pad onto the vibrations unit. • Fit the front edges of the vibrations unit through the large opening in the front of the pad. • Fit the upper pocket on the pad onto the seat back tube. • Ajustar el compartimento superior de la almohadilla en el tubo del respaldo.
PAGE 10
Battery Installation Colocación de las pilas Hint: We recommend using alkaline batteries for longer battery life. + - Atención: se recomienda usar pilas alcalinas para una mayor duración. 1,5V x 3 (LR44 or equivalent) (LR44 o equivalentes) + 1,5V D (LR20) - • Locate the battery compartment on the top of the vibrations unit. • Loosen the screws in the battery compartment door. Lift to remove the battery compartment door. • Insert one D (LR20) alkaline battery.
PAGE 11
Battery Installation Colocación de las pilas Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use.
PAGE 12
Setup and Use Preparación y uso WARNING To prevent serious injury or death: • Fall Hazard – Never use on any elevated surface, since child’s movement may cause product to slide or tip over. Use only on a floor. • Suffocation Hazard – Never use on a soft surface (bed, sofa, cushion) since product can tip over and cause suffocation in soft surfaces. • Always use restraint system until the child is able to climb in and out of the product unassisted.
PAGE 13
Setup and Use Lift Subir Preparación y uso Lower Bajar PRESS Button PRESIONAR botón PRESS Button PRESIONAR botón UPRIGHT VERTICAL RECLINE RECLINADA Restraint Belt Cinturón de sujeción Restraint Belt Cinturón de sujeción 1 Seat Position Upright: While pressing the button on each side rail, lift the seat back. Recline: While pressing the button on each side rail, lower the seat back. 3 Posición de asiento Vertical: Mientras presiona el botón en cada riel lateral, levante el respaldo.
PAGE 14
Setup and Use Preparación y uso Anchored End Extremo fijo Anchored End Extremo fijo B A A B Free End Extremo libre 5 4 Restraint System Sistema de sujeción • Tighten each waist belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts. • Apretar cada cinturón de la cintura de modo que el sistema de sujeción quede bien ajustado al niño/a.
PAGE 15
Setup and Use Preparación y uso Toddler Mode Modalidad de niño pequeño Small Slot Ranura pequeña PULL JALAR 1 6 • Insert the restraint belts back through the small slots in the pad. • Insert the restraint pad down through the large slot in the pad. Power Switch Interruptor de encendido • Fit the plugs on each end of the toy bar into the sockets in each side rail. Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar. • Make sure your child is properly secured in the seat.
PAGE 16
Consumer Information Información al consumidor FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.