44293/8+ T-Rex, Triceratops & Preponderant Includes: 28 Piece Wonder T-Rex, 17 Piece Wooden Triceratops, 23 Piece Wooden Preponderant, 8 Mini Washable Super Tip Markers, White Glue 0.17l 02 {S mL), 2 Sticker Sheets 3 inx 3 in (7.62 an x 7.62 am) each, 3 Ultra Fine Sandpaper Sheets 15inx1.5in (3.81 anxious am) each, Instruction Sheets Coloring: Start by coloring as many or as few of the pieces as desired. Refer to the diagram below to identify the main pieces of the item you are coloring.
Body (Images A, B, and C): 1. Fit the pieces together by joining the corresponding numbers. Punch out the “body” piece containing number “1”and the “hips” piece containing number “1” from the wood boards. Fit these pieces together so that “1” on the body joins to “1” on the hips. ey G| 2. Punch out the “tail” piece containing the number from the wood boards as well as the “leg” pieces containing through “6” Attach in numerical order to the “hips” l 7 f piece. 3.
Triceratops A DI Body (Image A): 1. Punch out the pieces labeled “spine” and the ribs labeled “1” through “5". 2. Fit the pieces together by joining the corresponding numbers. Attach the ribs to the spine by connecting “1” to slot “1” and so on. 3. Punch out the “shoulders”, and attach at “8” to slot “8” on the spine, making sure the colored side faces forward, and slots “6” and “7” face downward. 4. Punch out “arms” and attach at “6” and “7” to the shoulders. 5. Set body aside. Head (Image B): 1.
Legs (Image C): 1. Remove “hips” from the wood sheet, and attach the “hips” at “13” to slot “13” at the back of the spine. Make sure that the colored side faces to the back of the triceratops, and slots “12” and “14” face Punch out “legs” and attach to the corresponding slots “12” and “14” on the hips. 3.
Head (Image A): 1. Fit the pieces together by joining the corresponding numbers. Starting with number “1”, punch out the pieces labeled “1” (“body” and “beak”) from the wood boards and fit them together. 2. Punch out the “head” pieces (“2” through “5”) and fit together at the corresponding numbers. Body (Image B): 1. Start by punching out the “shoulders” piece from the wood boards and join the body of the periodontal. 2. Next, punch out the “legs” piece from and join the base of the alteration's body. 3.
