User Manual

3
• Fit the large bases together.
• Insert two screws into the bottom of
the large base assembly and tighten.
• “Snap” a small base onto the large
peg on a wall.
• Repeat this process to assemble the
other small base to the other wall.
Assembly
• Fit a wall onto a peg on the large base
assembly and push to “snap” in place.
• Repeat this process to assemble
the remaining wall to the large
base assembly.
Hint: Each wall is designed to fit on the
large base assembly one way. If it does
not seem to fit, turn it around and
try again.
1
2
3