User Manual

ManualsBrandsFisher-Price ManualsPlay YardsUltra-Lite Day & Night Play Yard - Sweet Surroundings

• The play yard, mattress,

inclined sleeper frame and

storage bag are surface

washable.

• The inclined sleeper frame

pad is machine washable.

Remove the pad from the

inclined sleeper frame and

machine wash separately in

cold water on the gentle cycle.

Do not use bleach. Tumble

dry on low heat.

• The changing station clutch

is machine washable.

Machine wash separately

in cold water on the gentle

cycle. Do not use bleach.

Line dry.

fisher-price.com

• Read all instructions BEFORE

assembly and USE of product.

• KEEP INSTRUCTIONS FOR

FUTURE USE.

• Adult assembly/setup is

required. No tools required.

•

IMPORTANT! Before assembly/setup and

each use, inspect this product for damaged

hardware, loose joints, missing parts or sharp

edges. DO NOT use if any parts are missing or

broken. Contact Fisher-Price

for replacement

parts and instructions if needed. Never

substitute parts.

Product features and

decorations may vary from

photographs and images.

Summary of content (16 pages)

PAGE 1
• Read all instructions BEFORE assembly and USE of product. • KEEP INSTRUCTIONS FOR FUTURE USE. • Adult assembly/setup is required. No tools required. IMPORTANT! Before assembly/setup and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. fisher-price.
PAGE 2
Play Yard Warnings WARNING • • • • • • • • • • • • • • Failure to follow these warnings and the instructions could result in serious injury or death. The product, including side rails, must be fully erected prior to use. Strings can cause strangulation! Never place items with a string around a child’s neck such as hood strings or pacifier cords. Never suspend strings over product or attach strings to toys. Use only with a child who cannot climb out and is less than 35 inches (890 mm) in height.
PAGE 3
Inclined Sleeper Warnings WARNING: Failure to follow these warnings and the instructions could result in death or serious injury. • FALL HAZARD – To prevent falls, stop using the inclined sleeper when infant: - Begins to roll over or - can pull up on sides, whichever comes first (approximately 5 months). • ALWAYS use restraint system. • SUFFOCATION HAZARD - Infants have suffocated: • In gaps between extra padding and side of a inclined sleeper. • On soft bedding.
PAGE 4
CONSUMER ASSISTANCE AYUDA AL CONSUMIDOR 1-800-432-5437 (US) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers/Clientes con problemas auditivos 1-800-382-7470. Centro de Servicio en México: 59-05-51-00 Ext. 5206 ó 01-800-463-59-89 ©2014 Mattel. All Rights Reserved.
PAGE 5
Parts Play Yard Inclined Sleeper Frame Inclined Sleeper Pad Changing Station Clutch Storage Bag Mattress 5
PAGE 6
Play Yard Setup 1 • Remove the play yard from the storage bag. • Unfold the play yard. A B Leg 2 • Lift a leg until you hear a “click” A. Repeat this procedure to open each leg B. 3 • Turn the play yard upright. • Push down on the play yard top rails to make sure the legs are locked in place.
PAGE 7
Play Yard Setup Mattress 4 • Place the mattress in the bottom of the play yard. A Slot B 5 BOTTOM VIEW Mattress Strap TOP VIEW • Fit the strap on a corner of the mattress through the slot in corner of the play yard floor A . • Repeat this procedure and fit the remaining mattress straps through the slots in the corners of the play yard floor. • Reach under the play yard floor and pull a strap down. Fasten it to the bottom of the play yard B .
PAGE 8
Inclined Sleeper Setup IMPORTANT! The inclined sleeper is only to be used attached to the play yard. Follow the Play Yard Setup instructions BEFORE following the instructions in this section. Inclined Sleeper Frame 1 • Fit the inclined sleeper frame around the top rails of the play yard. Clip Mount 2 • Fit all four clips on the inclined sleeper frame to the mounts on each corner of the play yard top rails.
PAGE 9
Inclined Sleeper Setup 3 • Push down on the inclined sleeper frame to be sure it’s secure. Inclined Sleeper Pad Pocket Waist Belt Waist Belt Support 4 • Fit the waist belts through the slots in the inclined sleeper pad. • Fit the pocket on the inclined sleeper pad onto the support on the inclined sleeper frame. • Press the inclined sleeper pad edges onto the fasteners on the inclined sleeper frame.
PAGE 10
Inclined Sleeper Use Restraint Pad Waist Belts 1 TOP VIEW Securing Your Child • Place your child in the inclined sleeper. • Position the restraint pad between your child’s legs. • Fasten both waist belts to the restraint pad. Make sure you hear a “click” on both sides. • Tighten each waist belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts.
PAGE 11
Play Yard Use REMOVE inclined sleeper frame IMPORTANT! Remove the inclined sleeper for play yard use. Pull up to remove all four clips on the inclined sleeper frame to remove from the play yard mounts. Changing Station Clutch Changing Station Clutch Wipes (not included) • Unfold the changing station clutch. • Insert wipes (not included) into the pocket in the clutch. • The changing station clutch easily folds and stores in the play yard pocket.
PAGE 12
Storage A C B 1 • Unfasten the mattress straps underneath the play yard floor • Pull each strap up through the slot in the play yard floor B . • Lift the ends of the mattress and remove from the play yard Button 2 PRESS • Turn the play yard over. • Press the button on a leg and lower the leg. • Repeat this procedure to lower the remaining legs. 12 A. C.
PAGE 13
Storage PRESS 3 PRESS • Press the latches on each play yard top rail. Hint: The latches are located under the circles (and inside the fabric) on the play yard top rails. 4 • Fold the play yard in half.
PAGE 14
Storage Inclined Sleeper Frame with Pad Changing Station Clutch Play Yard Mattress 5 • Place the inclined sleeper frame with pad and the changing station clutch inside the play yard. Hint: Tuck the fabric from the inclined sleeper frame into the center of the play yard. • Fit the play yard inside the mattress. 6 • Fasten the straps on the mattress.
PAGE 15
Storage Storage Bag 7 • Place the mattress with play yard, inclined sleeper and pad and changing station clutch inside the storage bag. • Zip the storage bag closed.
PAGE 16
Preventing Baby’s Head from Flattening Pediatricians and child health organizations agree that healthy babies should be placed on their backs to sleep for naps and at nighttime, to reduce the risk of Sudden Infant Death Syndrome (SIDS). But babies who are always on their backs can sometimes develop flat spots on their head (plagiocephaly). Most cases of positional plagiocephaly can be prevented (and sometimes corrected) by repositioning your baby to relieve pressure on the back of the head.