CMR51, CMR53 DKR72, DVM43 DYH25 Full-Size High Chair SpaceSaver High Chair Booster Seat Youth Chair IMPORTANT! Please keep these instructions for future reference. Adult assembly and setup is required. No tools are needed. fisher-price.
Consumer Information WARNING: When used as a high chair: Prevent serious injury or death from falls or sliding out. • Always use the restraint system. • Never leave child unattended. • Use upright position only with a child who is able to sit up unassisted. • Always leave wheels locked. Never use near steps. • The tray is not designed to hold the child in the product. When attached to an adult chair: Prevent serious injury or death from sliding out, falls, or tipping over.
Parts Tray Seat Back with Restraints Tray Insert Note: The tray insert is attached to the tray. Pad Footrest with Baby Wipes Compartment Infant Insert Seat Bottom with Restraints Note: The seat bottom has three parts: high chair seat, youth chair seat and chair attachment base.
Assembly and Setup for Full-Size High Chair Assembly steps 1-5 are one-time or a permanent assembly. Steps 6 - 16 complete assembly/setup for use as a full-size high chair. Frame PRESS PRESS PR 1 3 • Press the latch on the frame and open the leg until it "snaps" into place. • Repeat this process to open the other frame. • While pressing the button on the back base, insert it up into the remaining frame until you hear a "click". • Pull up on the frame to be sure it's secure to the back base.
Assembly and Se Setup for Full-Size High Chair Seat Back A PRESS A PRESS Front Base 5 B • Position the front base so that it curves away from you. • While pressing the buttons on the front base, lower the front end of the frame assembly into the front base until you hear a "click" on each side. • Pull up on the frame assembly to be sure it's secure to the front base. 6 B BACK VIEW • At an angle, fit the front tabs on the seat back into the openings in the top of the seat bottom A .
Assembly and Setup for Full-Size High Chair LIFT Crotch Belt PRESS 7 9 SIDE VIEW • Fit the crotch belt up through the large opening in the pad. • Press the seat back adjustment button and lift the seat back into the fully upright position. Pad Waist Belts Lowest Slots 10 • Fit the waist belts through the lowest slots in the pad. 8 FRONT VIEW • Place the pad onto the seat.
Assembly and Setup for Full-Size High Chair Shoulder Belts Lower Slots 11 13 Smaller Baby • Fit the shoulder belts through the lower slots in the pad for a smaller baby. SIDE VIEW • Fit the upper pad pocket over the seat back. Hooks Shoulder Belts Upper Slots 12 14 Larger Baby • Fit the shoulder belts through the upper slots in the pad for a larger baby. FRONT VIEW • Fasten the hooks on the pad to the front edge of the seat.
Assembly and Setup for Full-Size High Chair Infant Insert Footrest 16 15 • At an angle, fit the tabs on the footrest into the sockets in the front of the seat. Lower the footrest in place. Note: The footrest includes a baby wipes storage compartment. See page 19 for instructions to load baby wipes (not included, sold separately) into the compartment. • Fit the shoulder belts and the waist belts through the slots in the infant insert.
4 products in 1! 1 Full-Size High Chair 2 (See pages 4-8) 3 Booster Seat SpaceSaver High Chair (See pages 10-11) 4 (See pages 12-15) 9 Youth Chair (See page 15)
SpaceSaver High Chair Setup PRESS PRESS Chair Attachment Base Footrest 1 3 • Lift to remove the footrest. PRESS • Press the lower buttons on the sides of the seat bottom and remove the chair attachment base from the youth chair seat. PRESS 4 TOP VIEW • Position the attachment straps on the chair attachment base, as shown. 2 • Press the upper buttons on the sides of the seat bottom and lift to remove the high chair seat from the youth chair seat.
SpaceSaver High Chair Setup High Chair Seat Chair Attachment Base 5 7 B C • Buckle the attachment straps B . Make sure you hear a "click". Pull the free end of the attachment strap to tighten on the adult chair C . FRONT VIEW • Fit the high chair seat to the chair attachment base. Push to "snap" in place. D D E F 6 A 8 • Place the seat on an adult chair. • Wrap the bottom attachment straps around the bottom of the adult chair A .
Booster Seat Setup Footrest 1 3 • Lift to remove the footrest. SIDE VIEW • Remove the pad upper pocket from the seat back. Hooks 2 4 • Unfasten the hooks on the front edge of the pad from the seat bottom. • Push the waist and shoulder belts back through the slots in the infant insert and the pad. • Remove the infant insert.
Booster Seat Setup Crotch Belt LIFT 5 7 FRONT VIEW • Push the crotch belt down through the large opening in the pad. • Lift the large tabs on the seat back and remove the seat back. PRESS Pad PRESS 8 • Press the upper buttons on the sides of the seat bottom and lift to remove high chair seat from the youth chair seat. 6 • Remove the pad from the seat.
Booster Seat Setup Seat PRESS PRESS Chair Attachment Base 11 FRONT VIEW • Fit the seat to the chair attachment base. Push to "snap" in place. 9 • Press the lower buttons on the sides of the seat bottom and remove the chair attachment base from the youth chair seat. B 12 10 C A • Place the seat on an adult chair. • Wrap the bottom attachment straps around the bottom of the adult chair A . • Buckle the attachment straps B . Make sure you hear a "click".
Booster Seat Setup Youth Chair Setup D D Footrest E F 1 13 • Lift to remove the footrest. • Wrap the back attachment straps around the back of the adult chair D . • Buckle the attachment straps E . Make sure you hear a "click." • Pull the free end of the attachment strap to tighten on the adult chair F . PRESS PRESS 2 • Press the upper buttons on the sides of the seat bottom and lift to remove the high chair seat from the youth chair seat.
Securing Your Child B A A B A A 2 B B TIGHTEN LOOSEN • To tighten the waist belts: Feed the anchored end of the belt up through the buckle to form a loop A . Pull the free end of the belt B . Repeat this procedure to tighten the other belt. • To loosen the waist belts: Feed the free end of the belt up through the buckle to form a loop A . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the belt to shorten the free end of the belt B .
Tray Use Tray PRESS 1 3 • Press the button on the front of the tray to move the tray forward, backward or to remove. • Fit the tray onto the armrests. Tray Insert 2 • Place the tray insert onto the tray.
Seat Height Adjustment Wheel Locks PRESS 1 • Lower the tab on each rear wheel to lock in place. • Press the latches on each side of the frame and lift or lower the seat to the desired height. Seat Recline Adjustment PRESS 2 • Lift the tab on each rear wheel to unlock the wheels. • Press the button on the back of the seat and lift or lower the seat back to the desired position.
Baby Wipes Compartment Baby wipes are not included and sold separately. 3 • Open the door on the compartment. Footrest PUSH 1 • Lift to remove the footrest. 4 Baby Wipes Compartment • While pushing the spring loaded plate, insert a container of baby wipes (not included and sold separately). Clips 2 BOTTOM VIEW 5 • Place the footrest face down. • Spread the clips on the footrest and remove the baby wipes compartment. • Close the door.
Baby Wipes Compartment Storage PULL PULL BOTTOM VIEW 6 BACK VIEW • Fit the baby wipes compartment into the back side of the footrest. Tray 1 Footrest BACK VIEW • Turn the tray face down. Pull the latches out. • Fit the tray onto the high chair legs. 7 • At an angle, fit the tabs on the footrest into the sockets in the front of the seat. Lower the footrest in place.
Storage Chair Attachment Base Footrest 3 5 • Fit the chair attachment base to the bottom of the seat. Push to "snap" in place. • At an angle, fit the tabs on the footrest into the sockets in the front of the seat. Lower the footrest in place. PRESS 6 • Press the frame latches on each side of the seat and push the frame closed. Note: To open the frame, press the frame latches on each side of the seat and pull the frame open. 4 • Place the high chair seat onto the youth chair seat.
Dishwasher Safe The tray, tray insert, seat back and seat bottom are dishwasher safe. Footrest 1 • Lift to remove the footrest. PRESS PRESS IMPORTANT! Remove the restraint system, pad and infant insert from the seat bottom and the seat back before placing in dishwasher. 2 • Press the upper buttons on the sides of the seat bottom and lift to remove the high chair seat from the youth chair seat.
Dishwasher Safe 5 3 • When replacing the restraint system, we recommend that you buckle it as you would when restraining your child. This will make it easier to see where each belt should be replaced in the seat. • Assemble the seat back to the seat bottom. • Insert the disks on the ends of the restraint system into the slots in the seat. • Follow the assembly/setup instructions to complete assembly/setup of this product. BACK VIEW • Place the seat so that the back faces you.
CONSUMER ASSISTANCE 1-800-432-5437 (US) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers/Clientes con problemas auditivos 1-800-382-7470. ©2015 Mattel. All Rights Reserved.