UNITED STATES 1-800-432-5437 Fisher-Price, Inc. 636 Girard Avenue, East Aurora, NY 14052 Hearing-impaired consumers: 1-800-382-7470 CANADA 1-800-432-5437 Mattel Canada Inc. 6155 Freemont Blvd. Mississauga, Ontario L5R 3W2 © & ™ Mattel and Smart Toy LLC. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted.
Read this manual carefully for important safety information and operating instructions before using this toy. Keep these instructions for future reference, as they contain important information. Includes 1 non-replaceable 3,7V rechargeable (LiPo) battery. Battery Capacity: 2000 mAh. Requires a USB power brick (not included) and charger cord (included) to charge the battery. Charging should only be done by an adult. The charger cord is not a toy. Wi-Fi enhances real-time play, but is not required.
1 USB Brick (not included) 4 2 3 • Smart Toy is ready for play right out of the package. For best performance, fully charge the battery very soon! 1 Open the fasteners on the back of Smart Toy. 2 Plug the smaller end of the charger cord into Smart Toy’s socket. 3 Plug the other end of the charger cord into a USB brick (not included). 4 Plug the USB brick into a standard wall outlet. A fully charged battery may take up to 5 hours.
Green: Full Charge White: Power ON Red: Low Battery Yellow: Charging • Charge the battery until the power button light turns green. It will remain green until you remove the charger cord from Smart Toy. • Once the battery is charged, remove the charger cord from the socket in Smart Toy. Then remove the charger cord from the USB brick and unplug the USB brick from the wall outlet. • A fully charged battery should last for about 3½ hours of continuous play.
Power Button • Smart Toy’s power is completely OFF in package. To turn power ON, press and hold the power button for up to 10 seconds until it lights up. • If Smart Toy is left idle for more than 10 minutes, Smart Toy enters sleep mode and the power button light turns off. Press the power button to turn power back ON. • To turn power completely OFF, press and hold the power button for up to 10 seconds until the light turns off.
4 inches (10,2 cm) • Choose a Smart Card for a fun activity. • Hold the card approximately 4 inches (10,2 cm) from Smart Toy’s nose. You’ll hear a tone when Smart Toy recognizes it.
Settings Volume Bar • Here’s how to adjust the volume. - After downloading the parent app and connecting the app with Smart Toy, touch the settings icon in the upper right corner. - On the next screen, touch and slide the volume bar to turn volume up or down.
• If Smart Toy becomes unresponsive or doesn’t perform as expected, first try turning power completely OFF (press and hold the power button for up to 10 seconds until the light turns off) and then back ON (press and hold the power button for up to 10 seconds). If this doesn’t work, it may be time for a reset. Follow the instructions below: - Open the fasteners on the back of Smart Toy. - Insert a pointed object into the reset hole above the charging socket. Press until you hear a long tone.
• Smart Toy listens for responses up to 2 feet (61 cm) away! • Smart Toy responds when tossed in the air. In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Rechargeable batteries are only to be charged under adult supervision. • The supply terminals are not to be short-circuited. • Dispose of batteries safely. • Do not dispose of this product in a fire. The batteries inside may explode or leak.
• Protect the environment by not disposing of this product with household waste (2012/19/EU). Check your local authority for recycling advice and facilities. • Smart Toy is surface wash only. Do not immerse. Adults note: Periodically examine this battery charger for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. If the battery charger is damaged, do not use it.
FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.