User Manual

ManualsBrandsFisher-Price ManualsTrikesNickelodeon Teenage Mutant Ninja Turtles™ Lights & Sounds Trike

DRH68

fisher-price.com

Product features and decorations may vary from the photograph.

• Keep this instruction sheet for future reference, as it contains

important information.

• Adult assembly is required. Tools required for assembly: Phillips

Screwdriver, Hammer and Scrap Block of Wood (not included).

• Requires three AA (LR6) alkaline batteries (not included).

• Age: 2-6 years.

• Weight limit: 60 lb (27 kg).

• Choose areas for riding that are free of obstacles.

• Learn to stop safely.

• Use with caution as this product requires skill to operate safely

to avoid falls, collisions, and injuries to yourself (the rider)

and others.

IMPORTANT! It is good practice to start training children very

young regarding the importance of helmet use. When children are

older and riding bicycles and faster vehicles, it is important that

they use a helmet each and every time they ride. For this reason,

even while riding a tricycle, it is a good idea to familiarize your

child with helmet use, so that it becomes a habit for life. In the

United States, choose a helmet that complies with requirements of

the U.S. Consumer Product Safety Commission (CPSC) Standard

16 CFR 1203. Outside the U.S., choose a helmet that complies

with the requirements of the applicable certifying agency for

bicycle helmets.

Summary of content (8 pages)

PAGE 1
DRH68 Product features and decorations may vary from the photograph. • Keep this instruction sheet for future reference, as it contains important information. • Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). • Requires three AA (LR6) alkaline batteries (not included). • Age: 2-6 years. • Weight limit: 60 lb (27 kg). • Choose areas for riding that are free of obstacles. • Learn to stop safely.
PAGE 2
Consumer Information WARNING: FASTENERS SHOWN ACTUAL SIZE TO AVOID SERIOUS INJURY: • Continuous adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes. • Never allow more than one rider. 1,3 cm Screw – 3 1,9 cm Screw – 4 Cap Nut – 1 • Please save all packaging material until assembly is complete to ensure that no parts are discarded.
PAGE 3
Assembly WARNING Cap Nut Adult assembly required. Choking hazard to children under the age of 3 years – contains small parts prior to assembly. Hubcap (Peg Side Down) Rear Wheel (Indented Side Up) Cover Straight Axle Frame Hubcap Rear Wheel (Indented Side Down) Scrap Block of Wood 3 • Turn the frame on its side with the exposed end of the straight axle up. • Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut.
PAGE 4
Assembly Pedal Hubs Pedal Axle Assembly Pedal Front Wheel Pedal Axle 5 • While holding the pedal hubs on the pedal axle assembly, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. Scrap Block of Wood 7 • Fit the pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure.
PAGE 5
Assembly Headlight Cover Handlebar Frame Neck Fork Post Fork Cover 11 Rear of Trike • Fit the headlight cover onto the front of the handlebar. • Insert three 1,3 cm screws into the headlight cover. Tighten the screws. 9 Seat Retainer • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame.
PAGE 6
Label Decoration Attaching the Seat Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fit on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down.
PAGE 7
Battery Installation Removing the Seat Headlight Cover Seat Seat Retainer Tab Seat Retainer Tab 1 • Loosen and remove the screws from the headlight cover. Remove the headlight cover. • Turn the frame on its side. • Squeeze the seat retainer tabs toward one another and lift the seat from the frame. 1,5V x 3 AA (LR6) Let's Go! Turn Signal Horn Sounds Turn Signal Sounds 2 • Loosen the screw in the battery compartment door. Open the battery compartment door.
PAGE 8
Consumer Information Care • Periodically inspect this product for wear or damage. Check plastic parts regularly and if broken or cracked, dispose of them properly. Replace worn or broken parts immediately. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue.