User Manual

• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the straight axle.
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of the frame.
Rear Wheel
(Indented Side Down)
• Turn the frame on its side with the exposed end of the straight
axle up.
• Place the cap nut assembly tool under the assembled rear wheel
and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the cap nut
with a hammer. Gently pull the rear wheel up to be sure the cap
nut is securely attached to the straight axle.
• Insert one of the tabs on a cover into a slot in the hubcap. Push
to snap the cover into place. Repeat this procedure to attach the
other cover to the other hubcap.
Cap Nut
Rear Wheel
(Indented
Side Up)
Cap Nut
Assembly Tool
Assembled
Rear Wheel
Straight Axle
Hole
Hole
Frame
Straight Axle
Hubcap (Peg Side Up)
Hubcap (Peg
Side Down)
Frame
Straight Axle
Scrap Block
of Wood
• Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs
fit into the slot in each pedal hub.
Pedal Hub
Pedal Hub
Pedal Axle
Tabs
Slot
Assembly
3
Bottom View
Cover
Hubcap
1
2
3
4
WARNING
Adult assembly required. Choking hazard to
children under the age of 3 years – contains
small parts prior to assembly.