User Manual

• Insert the fork post up through the hole in the neck of the frame.

Make sure the fork is positioned so that the fork covers face

the rear wheels.

• Place the handlebar onto the fork post and push it down onto

the frame. Make sure the handlebar is positioned so that the

screw hole faces the rear wheels and aligns with the screw hole

in the fork post.

Hint: You may need to rotate the handlebar to align the holes.

• Insert the 7,6 cm screw through the hole in the handlebar and

into the fork post so that part of the screw (about 1,9 cm) is still

visible. Tighten the screw.

Handlebar

Frame

Neck

Fork Post

Fork Cover

Rear of Trike

• Position the seat upside down.

• Fit the small pegs on the seat retainer into the holes in the seat.

• Insert and “snap” the cap into the hole in the frame.

Cap

Seat Retainer

Seat

Peg

Cheville

• Fit the headlight cover onto the front of the handlebar.

• Insert three 1,3 cm screws into the headlight cover. Tighten

the screws.

Headlight

Cover

Assembly