User Manual

ManualsBrandsFisher-Price ManualsBaby Bouncers & RockersSweet Snugapuppy Dreams Deluxe Baby Bouncer

DTH04

fisher-price.com

IMPORTANT! Read all instructions before use

of the infant bouncer seat. Keep instructions

for future use.

• Please read these instructions before

assembly and use of this product.

• Adult assembly is required. Tool needed for

assembly: Phillips screwdriver (not included).

Assembly instructions on back side of

this sheet.

• Requires three C (LR14) alkaline batteries

(not included) for soothing unit operation.

• Use from birth until baby starts trying to

sit up.

• Product features and decorations may vary

from photographs.

¡IMPORTANTE! Leer todas las instrucciones

antes de usar la silla mecedora. Guardar estas

instrucciones para futura referencia.

• Leer estas instrucciones antes de ensamblar

y usar este producto.

• Requiere montaje por un adulto. Herramienta

necesaria para el montaje: desatornillador de

cruz (no incluido). Ver el dorso de esta hoja

para las instrucciones de montaje.

• La unidad relajante funciona con 3 pilas

alcalinas C (LR14) x 1,5V (no incluidas).

• Usar a partir del nacimiento hasta que el

bebé intente incorporarse por sí solo.

• Las características y decoración del producto

pueden variar de las mostradas.

• Slide the power switch to ON or OFF.

• Press the vibration button to turn

vibrations on. Press again to turn it off.

• Press the music or sound effects

button to play sounds. Press

again to turn music or sounds off.

• Press the volume buttons to adjust

the volume level.

• Poner el interruptor de encendido

en ENCENDIDO o APAGADO.

• Presionar el botón de vibraciones

para activar vibraciones. Volver

a presionarlo para apagarlas.

• Presionar el botón de música

o efectos de sonido para activar

sonidos. Volver a presionarlos para

apagar la música o los sonidos.

• Presionar los botones del volumen

para ajustar el volumen.

Summary of content (12 pages)

PAGE 1
DTH04 • Slide the power switch to ON or OFF. • Press the vibration button to turn vibrations on. Press again to turn it off. • Press the music or sound effects button to play sounds. Press again to turn music or sounds off. • Press the volume buttons to adjust the volume level. • Poner el interruptor de encendido en ENCENDIDO o APAGADO. • Presionar el botón de vibraciones para activar vibraciones. Volver a presionarlo para apagarlas. • Presionar el botón de música o efectos de sonido para activar sonidos.
PAGE 2
WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended. To prevent falls and suffocation: • ALWAYS use restraints. Adjust to fit snugly.
PAGE 3
Setup and Use Preparación y uso Restraint Pad Almohadilla de sujeción A B B 2 1 A TIGHTEN APRETAR LOOSEN AFLOJAR To tighten the restraint belts: • Feed the anchored end of the restraint belt up through the buckle to form a loop A . Pull the free end of the restraint belt B . To loosen the restraint belts: • Feed the free end of the restraint belt up through the buckle to form a loop A . Enlarge the loop by pulling on the end of the loop toward the buckle.
PAGE 4
Battery Installation Colocación de las pilas IMPORTANT! Low battery power causes this product to operate erratically: no vibrations and the product may not turn off. Remove and properly dispose of the batteries and replace with three new C (LR14) alkaline batteries. 1,5V x 3 C (LR14) For longer life, use alkaline batteries. ¡IMPORTANTE! Si las pilas están gastadas, el producto no funcionará correctamente (sin vibraciones ni función de apagado).
PAGE 5
Battery Installation Colocación de las pilas Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable. • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
PAGE 6
Care Mantenimiento CO SU CONSUMER ASSISTANCE SS S ATENCIÓN AL CLIENTE • The pad and infant support are machine washable. Wash them separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame, toy bar and toys may be wiped clean using a mild cleaning solution and damp cloth. Do not immerse the frame. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue.
PAGE 7
Assembled Parts Piezas ensambladas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. ¡IMPORTANTE! Sacar todas las piezas del empaque e identificarlas previo al montaje. Algunas piezas pueden venir embaladas en la almohadilla.
PAGE 8
Assembly Montaje • Colocar las patas de modo que la superficie antiderrapante esté hacia abajo. • Con el lado de la clavija hacia adentro, conectar las patas en el tubo de la base. • Introducir un tornillo en la parte exterior de cada pata y apretarlos. Base Tube Tubo de base Left Base Wire Tubo de base izquierdo 1 Right Base Wire Tubo de base derecho Footrest Reposapiés • Place the base tube on a flat surface. • Position the left and right base wires, as shown.
PAGE 9
Assembly Montaje Seat Back Respaldo SIDE VIEW VISTA DEL LADO Connector Conector Connector Conector 5 • Place and hold a connector to a base wire, as shown. • Insert a screw through the seat back, base wire and into the connector. Tighten the screw. • Repeat this procedure to assemble the other connector to the other side of the seat back tube. • Pull the seat back tube up to be sure it is secure. If you can remove either end of the seat back tube, you have not assembled the connectors correctly.
PAGE 10
Assembly Montaje Straps Cinturones Pad Seat Back Pocket Funda del respaldo de la almohadilla 6 8 • Fit the upper pocket on the back of the pad onto the seat back. • Fasten the pad straps on the back of the pad around the soothing unit. Make sure you hear a “click”. • Ajustar la funda superior del dorso de la almohadilla sobre el tubo del respaldo. • Ajustar los cinturones del dorso de la almohadilla alrededor de la unidad relajante. Asegurarse de oír un clic.
PAGE 11
Assembly Montaje • Mientras presiona el botón de la barra de juguetes, insertar la pieza central en la barra de juguetes y empujarla para ajustarla en su lugar. Atención: la pieza central está diseñada para ajustarse en la barra de juguetes de una sola manera. Si no se ajusta, voltearla e intentar de nuevo. Infant Support Soporte infantil Toy Bar Barra de juguetes Socket Conexióón Conexi 10 • Place the infant support on top of the pad. • Insert the restraint pad through the slot in the infant support.
PAGE 12
Consumer Information Información al consumidor FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.