DTM20 B6312 L5803 Y0895 BMM05 Keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). Requires four D (LR20) alkaline batteries (not included) for operation. fisher-price.
Assembly Assembled Parts Ball Chute (2 Pieces) Slots Tabs Cover 1 • Insert and snap the tabs into the slots in the ball chute pieces. Base Motor 2 #6 x 15 mm Screws - 4 • Insert two screws into the pegs at the top of the ball chute and tighten. SHOWN ACTUAL SIZE Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
Assembly Ball Chute Motor Groove Socket 3 5 • Align the tabs at the bottom of the ball chute with the grooves in the opening of the motor. • Turn the ball chute clockwise to lock it into position. Pull up on the ball chute to be sure it is secure. Plug • Lower the motor so that the open peg fits into the groove in the base. • Insert the battery plug into the socket in the motor, as shown. Hint: If there isn’t a socket inside the peg, the motor/chute assembly is backwards in the base.
Battery Installation Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Batting Practice Tips Beginner • We recommend using this toy outdoors, on a non-paved surface, such as grass or sand. Do not use outdoors when it is raining or there is wet grass. The balls will not launch properly. • When your child is batting, be sure there are no other children in or around the batting area, including directly in front of the unit. • This toy is designed for use with foam balls and plastic bat (both included).
Rookie Pro Balls pop up automatically to hit. • Push the ball chute all the way back. • Load the balls into the side of the ball chute. • Locate the power switch on the top of the motor. Slide the power switch ON . • Press the automatic ball button and get ready. • Stand about two feet (0,6 meters) to the side of the base. • Hit the ball when it pops up! A Automatic Ball Button Power P Switch Hit the pitched ball from up to 10 feet (three meters) away! • Position the ball chute completely upright.
Consumer Information Storage • Load the balls into the side of the ball chute. • Fit the bat in the circular opening in the base. FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Consumer Information WARNING • To prevent injury from balls and moving parts: - Keep face, head and hands away from the ball release. - Use only the balls included. - Never put other objects in the ball chute. • Do not aim at eyes or face. Only use projectiles supplied with this toy. Do not fire at point blank range. CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470.