User Manual

310 3
1. CONNECT THE VEHICLE AND PUSH THE BUTTON.
2. TOGGLE THE STEERING STICK LEFT OR RIGHT UNTIL YOU HEAR: “FACTORY RESET”.
3. PUSH THE BUTTON.
5. A SERIES OF ‘BEEP’S WILL PLAY TO CONFIRM YOU HAVE RESET
YOUR CONTROLLER TO ORIGINAL FACTORY STATUS.
4. AFTER YOU HEAR THE “WARNING: FACTORY RESET” VOICE PROMPT,
PRESS THE BUTTON AGAIN TO CONFIRM.
HERE’S HOW!
YOU CAN RETURN YOUR CONTROLLER TO THE ORIGINAL FACTORY SETTINGS AT ANY TIME.
• OPEN AND CLOSE THE BATTERY COVER WITH A PHILLIPS HEAD SCREWDRIVER (NOT INCLUDED).
• EACH RACE VEHICLE REQUIRES THREE 1.5V AAA BATTERIES.
• BATTERIES NOT INCLUDED. DISPOSE OF BATTERIES SAFELY.
• OPEN AND CLOSE THE BATTERY COVER
WITH A PHILLIPS HEAD SCREWDRIVER
(NOT INCLUDED)
• EACH CONTROLLER REQUIRES THREE 1.5V AA BATTERIES.
• BATTERIES NOT INCLUDED. DISPOSE OF BATTERIES SAFELY.
PREP YOUR RACE VEHICLE
PREP YOUR GAMING CONTROLLER
FACTORY RESET
“WARNING:
FACTORY RESET”
• IF CONTROLLER IS ACCIDENTALLY DROPPED IN THE WATER, REMOVE BATTERY(S) AND ALLOW
CONTROLLER TO AIR DRY. REPLACE WITH FRESH BATTERY(S) BEFORE OPERATION.
• PLAY SAFELY! – DO NOT DRIVE VEHICLE ON COARSE SURFACES, OFF-ROAD OR IN THE STREET!
HINTS AND TIPS ON HOW TO OPERATE THE TOY SAFELY