User Manual

4
9
CONNECT YOUR GAMING CONTROLLER AND VEHICLE
NOTE: Make sure you have correctly installed the batteries in both your vehicle and controller (see page 3).
THE ACTION STARTS ONCE YOU POWER ON YOUR CAR AND CONTROLLER.
NOTE: You can reset the language at any time by powering off the controller and turning it
back on while pressing down on the button.
Use the STEERING STICK to toggle left and right
until you hear the language you want to play in.
If playing for the first time (or after loading a new set of batteries)
you will be asked to select a language.
Press the button to POWER ON your controller.
Press the button to select.
1
2
3
4
TROUBLESHOOTING
Turn the vehicle power switch to I.
Listen for the voice prompt from the
controller to confirm:
5 6
“VEHICLE AND
CONTROLLER
CONNECTED”
I O
Symptom Cause Solution
Batteries are low or faulty Replace old batteries with high quality
alkaline batteries
Vehicle and/or controller
continually switches off or
restarts
Vehicle batteries are low Replace old batteries with high quality
alkaline batteries
Vehicle running slowly/controller
says "Vehicle Batteries Low"
Vehicle batteries low (likely) or
controller batteries low (possible)
Replace vehicle batteries, if the
problem persists, replace controller batteries
Controller says
"Connection Lost"
Vehicle will not pair
with the controller
Batteries in the vehicle or
controller are low on power
Replace old batteries with high quality
alkaline batteries
Incorrect language set at
startup
Switch on the controller while holding
down the 'X' button
The controller is not speaking
the language I require
Controller may be set to low
volume
Increase volume in the system
settings menu (see page 5)
Controller volume is low
Steering out of alignment Adjust steering alignment (see page 8)Vehicle does not drive straight
in Freeplay mode
Vehicle tires/body not fitting correctly Check tires are securely on the wheel
covers/Check body shell is properly
attached to the chassis
Vehicle does not steer properly
Controller frequently says
“Connection Lost”
after replacing all batteries
Interference from other 2.4GHz
equipment including WiFi
Turn off or move away from other sources
of 2.4GHz transmissions