User Manual

12
1
While feeding the strap into the slot on
the inside of the hub, pull the strap on the
outside of the hub.
2
Lower the strap bar.
3
Pull the strap out or feed it into the hub to
the desired height .
4
Fit the strap bar into the desired slot in
the strap.
Hint: You may need to feed the strap, from the
inside of the hub, to be able to insert the strap
bar into the slot in the strap.
5
Lift the strap bar to secure the strap
in place.
6
Pull the strap on the inside of the hub.
IMPORTANT! Repeat this process to adjust the
height for the other two straps. Make sure all
three straps are adjusted to the same height.
Seat Height Adjustment
Ajuste de altura de la silla
1
Mientras introduces el cinturón en la ranura
del interior de la conexión, jala el cinturón en
el exterior de la conexión.
2
Baja la barra del cinturón.
3
Jala hacia afuera el cinturón o mételo en la
conexión en la posición deseada .
4
Introducir la barra de cinta en la ranura
deseada en la cinta.
Atención: Quizá sea necesario meter el
cinturón del interior de la conexión para poder
meter la barra del cinturón en la ranura
del cinturón.
5
Sube la barra del cinturón para asegurar el
cinturón en su lugar.
6
Jala el cinturón en el interior de la conexión.
¡IMPORTANTE! Repite este procedimiento para
ajustar la altura de los otros dos cinturones.
Asegurarse de que las tres cintas estén
ajustadas a la misma altura.
1
4
2
5
3
6