Owner's Manual

29
Note: If you are
attaching to
a stud or into
wood, you do
not need to
follow this step.
Proceed to
step 4.
Using a
3
/16" (4,76 mm)
drill bit, drill one hole
through each pencil mark
you made on door jamb.
2
REMOTE FASTENER INSTALLATION
1
The remote
should be
installed in
a place most
convenient to
access from
either side of
the gate (e.g.,
door jamb).
Place the remote
mount to the
door jamb.
Using a pencil,
make two marks
through the
screw holes.