Swing Owner's Manual

Upper Seat Tube

• Tip the assembly on it’s side on a flat surface.

• Fit the lower seat tube into the upper seat tube.

Lower Seat Tube

• First, fit an M5 lock nut into an opening in the short tube.

Make sure the rounded side of the lock nut faces out.

• Next, insert an M5 x 30 mm screw through the opening in the

opposite side of the short tube. Fully tighten the screw with

the Allen wrench.

• Turn the assembly upright.

• Fit the string (below the knot) of a toy through the slot in a

clip on the mobile.

• Pull down on the toy to be sure it is secure on the mobile.

• Repeat this procedure to assemble the other three toys to

the mobile.

Clip

Mobile

Toy

• First, fit an M5 lock nut into an opening in the upper seat tube.

Make sure the rounded side of the lock nut faces out.

• Next, insert an M5 x 30 mm screw through the opening in the

opposite side of the upper seat tube. Fully tighten the screw

with the Allen wrench.

Assembly

Clip

Slot

Rounded

Side

Rounded

Side