TM Product features may vary from the picture above. CAUTION ELECTRIC TOY: Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock. Monster Sound BIGFOOT ® Owner’s Manual with Assembly Instructions Please read this manual and save it with your original sale’s receipt. For Model 74420 Tools needed for assembly: Phillips Screwdriver, Slotted Screwdriver, Hammer, Safety Scissors.
Throughout this manual you will find important messages in the form of WARNINGS, CAUTIONS, and NOTES. WARNING WARNING – SIGNALS SOMETHING THAT COULD HURT YOUR CHILD OR YOU. The message explains the hazard and how you can avoid it. WARNING • Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle.
CAUTION NOTE – Is used to highlight useful information. CAUTION – SIGNALS SOMETHING THAT COULD DAMAGE THE VEHICLE. The message explains the risk and how you can avoid it. CAUTION • Do not operate your vehicle for the first time until you have inserted the 30 amp fuses into the 6 volt batteries and charged the 6 volt batteries for at least 18 hours. Never charge the 6 volt batteries longer than 30 hours. • After first-time use, charge the 6 volt batteries for at least 14 hours after each use.
Table of Contents A B C D E F G H I J K L M N O Message to Parents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B Important Information • Carefully read this manual for important safety information and operating instructions before using your vehicle. • Please complete and return the enclosed Registration Card, or call 1-800-348-0751 to register your vehicle by phone. • Monster Sound BIGFOOT ® is designed for use by children 3-7 years. • Adult assembly is required. • Monster Sound BIGFOOT ® has an adjustable play seat belt.
C Parts If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. Please save all packaging material until assembly is complete to ensure that no parts are discarded.
Parts #6 x 3/8" Screw – 2 #8 x 1" Screw – 18 Key Knob #6 x 11/2" Screw – 2 #6 x 1/2" Screw – 4 30 Amp Fuse – 3* .354 Cap Nut – 3* All Shown Actual Size *For your convenience, an extra 30 amp fuse and .354 cap nut have been included.
D Parts Diagram 14 15 13 1 16 12 5 2 6 11 17 7 3 31 25 8 30 9 18 10 19 22 23 22 29 20 21 TM 28 26 24 27 4 7 Parts 1 2 3 4 5 6 7 8 9 10 11 Airscoop Hood Microphone Steering Column Steering Wheel Steering Wheel Cap Cap Nut Sound Box Cover Knob Key Seat 12 13 14 15 16 17 18 19 20 21 22 Lens Cover Lens Light Plate Light Housing Sport Bar Cover Sport Bar Bracket Sport Bar Support Sport Bar Tailgate Left Taillight Sport Bar Foot 8 23 24 25 26 27 28 29 30 31 Right Taillight Vehicle Body So
E First-Time 6 Volt Battery Charging We recommend that you start charging your 6 volt batteries before beginning assembly of your vehicle. Your new 6 volt batteries must be charged for at least 18 hours before you use your vehicle for the first time. WARNING • Batteries must be handled by adults only. • Never allow children to charge the 6 volt batteries. Battery charging must be done by adults only. A child could be injured by the electricity involved in charging batteries.
First-Time 6 Volt Battery Charging Battery Connectors Fuse ® • Insert a 30 amp fuse into each 6 volt battery. Note: The top of the fuse will not be flush with the top of the 6 volt battery when properly installed. • Stack one battery connector on top of the other and snap them together.
G Assembly Do Not Omit Any Steps. Please set aside at least 45 minutes for assembly. Battery Compartment Door Sound Box Battery Compartment LR6 “AA” 1.5 x 3 + - SHOWN ACTUAL SIZE Sound Box Dash Pocket 1 • Locate the sound box battery compartment. • Loosen the screw in the battery compartment door with a Phillips screwdriver. The screw will remain in the door. • Lift the battery compartment door open.
Assembly 3 Tabs Knob Key Sound Box Cover Slots Tabs Sound Box Cover #6 x 3/8" Screw – 2 Shown Actual Size • Position the sound box cover as shown. Make sure the three tabs are at the top. • Fit the knob into the hole in the right side of the sound box cover. • Fit the key into the hole to the left of the knob. • Insert a #6 x 3/8" screw into the back of the knob and into the back of the key. • Tighten the screws with a Phillips screwdriver. Do not over-tighten.
Assembly Slot 5 Tab Microphone “T” End Hole Steering Column Front Axle Slot Bottom View 6 Helpful Hint: You may want the help of another person to complete assembly steps 6 through 9. • Wipe the steering column with a paper towel to remove any excess lubricant. • Carefully lift the front end of the vehicle. • Insert the straight end of the steering column under the front axle, through the slot in the vehicle body and out through the large hole in the center of the dash.
Assembly Cap Nut 8 • Fit a cap nut onto the end of the steering column. • While supporting the steering column, tap the cap nut with a hammer to secure it on the steering column. Front Axle Steering Column Bottom View “UP” Cap Nut Steering Wheel 9 • Hold the steering column in place and gently lower the vehicle body. • Position the steering wheel so that the spokes form a “Y” as shown. • While supporting the steering column, fit the steering wheel onto the steering column.
Assembly 11 • Insert the two tabs on the bottom of the seat into the slots in the vehicle body. Seat Tabs Slots 12 #8 x 1" Screw – 4 Shown Actual Size Push Here First Position Second Position 15 Please Note: The seat can be assembled in either of two positions for your child’s comfort. • Push down on the center of the seat and slide it toward the rear of the vehicle. • Align the screw holes in the back of the seat with the first or second set of holes in the vehicle body.
Assembly 13 Center Hole Sport Bar Feet #8 x 1" Screw – 2 Shown Actual Size •Using safety scissors, remove the sport bar feet from the plastic connector. Dispose of the plastic connector. • Insert the peg on a sport bar foot into the hole closest to the back of the seat in one side of the vehicle body. • Align the hole in the sport bar foot with the hole in the vehicle body. Make sure the large hole in the center of the sport bar foot faces toward the front of the vehicle.
Assembly Label #15 Slot • Apply a label to the center of each of the light plates, as shown. • Align the cut-outs in the labels with the slots in the light plates, so that the labels do not cover the slots. • Make sure the areas where the labels will be applied are clean and dry. For best adhesion, avoid applying the labels more than once. • Set the light housing assemblies aside.
Assembly Lenses Light Light Rack 18 • Slide the assembled sport bar lights onto the light rack with the lenses facing away from the hinge. • Fit a 3/16" washer onto each of two #8 x 1" screws. • Insert the #8 x 1" screws with washers up through the light rack and into the sport bar lights as shown. • Tighten the screws with a Phillips screwdriver. Do not over-tighten.
Assembly Sport Bar 20 Light Rack Bottom Half #6 x 11/2" Screw – 2 Shown Actual Size Outer Slot - Right Seat Belt Strap • Fit the bottom half of the light rack onto the center section of the sport bar. • Insert two #6 x 11/2" screws up through the bottom half of the light bar and into the sport bar, as shown. • Close the light rack around the sport bar, making sure that the seat belt strap exits through the outer slot in the right side of the light rack. • Tighten the screws with a Phillips screwdriver.
Assembly 22 • Push down firmly on one side of the sport bar while pulling up on the side fender to secure the sport bar in the vehicle body. • Repeat this procedure on the other side of the sport bar. Sport Bar PUSH HERE TM PULL UP HERE 23 Sport Bar Support Sport Bar Support • Fit a sport bar support into the hole in each sport bar foot. Sport Bar Foot Tab Sport Bar Support Sport Bar Bracket Sport Bar 20 24 • Using safety scissors, remove the sport bar brackets from the plastic connector.
Assembly 25 Sport Bar Sport Bar Bracket #8 x 1" Screw – 2 Shown Actual Size • Fold the sport bar bracket over the sport bar to close it around the sport bar and sport bar support. • Insert a #8 x 1" screw through the sport bar bracket and into the inside surface of the sport bar, as shown. • Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Repeat steps 23 and 24 to attach the left sport bar bracket to the left side of the sport bar.
Assembly 27 Middle “T” Tab • With the fastener side of the short seat belt strap facing the floor of the vehicle body, insert the “T” tab at the end of the short seat belt strap into the slot in front of the seat. Do not insert the “T” tab in the middle of the strap through the slot. • Pull up on the short seat belt strap to make sure it is properly inserted in the slot. • Fasten the seat belt straps.
Assembly Grille Tab Right Headlight Lens Tabs Left Headlight Lens • Using safety scissors, remove the headlight lenses from the plastic connector. Dispose of the plastic connector. • Align the tabs on the back of the right and left headlight lenses with the slots in the grille. Please Note: The right and left headlight lenses are NOT interchangeable. • Press firmly to snap the headlight lenses into the grille. 31 Slots • Face the front of the vehicle.
Assembly 33 Airscoop Hood Please Note: If you have already charged your Power Wheels® Type H 6 volt batteries for at least 18 hours, you may want to install them in the battery compartment before assembling the hood. Please refer to the 6 Volt Battery Installation section on page 26 for instructions. • Fit the peg on one side of the hood into one of the hood openings near the base of the windshield area.
Assembly 34 3 1 Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils. • For best results, avoid repositioning a label once it has been applied to the vehicle. • Place the labels as shown in the illustrations.
G 6 Volt Battery Installation Please Note: It is easier to install the Type H 6 volt batteries before assembling the hood to your vehicle. If you have already assembled the hood to your vehicle, you may want to remove it to install the Type H 6 volt batteries. 1 Battery Connectors ® Power Wheels 30 Amp Fuses Power Wheels® Type H Batteries • The battery compartment is located under the hood of your vehicle. • Place both Power Wheels® Type H 6 volt batteries upright in the battery compartment.
6 Volt Battery Installation 3 Battery Retainer #8 x 1" Screw – 2 Shown Actual Size • Position the battery retainer over the 6 volt batteries with the ends of the battery retainer aligned with the screw holes in the battery compartment. • Insert two #8 x 1" screws through the battery retainer and into the battery compartment. • Tighten the screws with a Phillips screwdriver. Do not over-tighten. • Place the connectors under the battery retainer toward the rear of the battery compartment.
H Charging the 6 Volt Batteries WARNING • Batteries must be handled by adults only. • Never allow children to charge the 6 volt batteries. Battery charging must be done by adults only. A child could be injured by the electricity involved in charging batteries. • Use of the wrong type of battery, fuse or charger could cause a fire or explosion, resulting in serious injury. • Never permit a child to handle batteries.
Charging the 6 Volt Batteries Important Note: The 6 volt batteries must be upright while charging. You do not have to remove the 6 volt batteries from the vehicle to charge them.
I Battery Handling/Care/Disposal WARNING CAUTION • Carefully read the Battery Care instructions to obtain the best battery life. Failure to follow the Battery Care instructions may damage your 6 volt batteries and will void your warranty. • Batteries must be handled by adults only. • Never permit a child to handle batteries. The 6 volt batteries are heavy and contain sulfuric acid (electrolyte), and if dropped could result in serious injury. Read the cautions on the back panels of the 6 volt batteries.
J Rules for Safe Driving WARNING CAUTION • To avoid damaging motors and gears, do not overload the vehicle. - Never allow more than one child in the vehicle at one time. - Do not exceed the maximum weight capacity of 65 lbs. - Do not tow anything behind Monster Sound BIGFOOT®. The extra weight may overload the vehicle. • Avoid operating the vehicle in wet or snowy conditions, and do not spray the vehicle with a hose. Do not wash the vehicle with soap and water.
Rules for Safe Driving • While driving across a steep slope, the vehicle may tilt and tip over. The wheels could lose traction, causing the vehicle to slip. •While driving up a steep incline, the motor may stop and the vehicle could roll backwards at an unsafe speed. 10° Incline should never be more than 10° 5. Never allow more than one child in the vehicle at one time. Children who are not sitting on the seat or who are standing on the vehicle could fall off, cause a tip-over or block the driver’s view.
K 1 How to Operate Your Vehicle To help your child develop the skill necessary to drive this vehicle safely, your Power Wheels® vehicle has been pre-assembled so that it will only operate in low speed (21/2 mph, maximum). After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to disconnect the high-speed lock-out to allow the vehicle to operate at low (21/2 mph, maximum) or high speed (5 mph, maximum).
How to Operate Your Vehicle 1 2 To Drive: Note: To prevent damage to the motors, stop the vehicle before shifting speeds. • Make sure the shifter is in the HIGH ( ) position 1 . • Press down on the foot pedal 2 . The vehicle goes forward at a maximum of 5 mph 3 . • Help your child practice steering to learn how far and how quickly to turn the steering wheel when driving forward in high speed. 3 To Stop: • Stopping in high speed is the same as stopping in low speed.
L Frequently Asked Questions Q. A. How often do I need to charge the 6 volt batteries? Charge the 6 volt batteries for a minimum of 14 hours after each use of the vehicle or whenever the vehicle begins to slow down. When the vehicle is not in regular use, charge the 6 volt batteries at least once a month until normal use is resumed. Q. A. How much riding time should I get after charging the 6 volt batteries? You should get from one to three hours of riding time per charge.
M Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Affairs, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels® Authorized Service Center. For the location nearest you, please refer to the Authorized Service Center list beginning on page 40.
Problems and Solutions Guide Problem Vehicle was running but suddenly stopped Short run time (Less than 1 hour in high speed; less than 3 hours in low speed) Possible Cause Solution Loose wire or loose connectors Check all wires and connectors. Make sure the battery connector is tightly plugged into the motor harness connector, and that there are no loose wires around the motors.
Problems and Solutions Guide Problem Vehicle runs sluggishly Possible Cause Undercharged batteries Solution Charge the batteries. New batteries should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge batteries for at least 14 hours after each use. Never charge the batteries longer than 30 hours. Check all connectors.
Problems and Solutions Guide Problem Sometimes the vehicle doesn’t run, but other times it does When the foot pedal is pressed, the vehicle won’t run without a push Vehicle constantly blows fuses 30 amp Possible Cause Solution Loose wire or connector Check all wires around the motors and all connectors to make sure they are tight. Motor or electrical switch damage Contact your local Power Wheels® Authorized Service Center for diagnosis and repair.
N Statement of Limited Warranty 90-day limited warranty for the Power Wheels® Ride-On Toy Vehicle A 6-month battery warranty applying only to those 6 volt batteries which were included by Power Wheels®, with the Power Wheels® vehicle when originally purchased. This limited warranty covers the Power Wheels® ride-on vehicle and the 6 volt batteries, purchased from Power Wheels® by the original purchaser, against defects in materials and workmanship.
Authorized Service Centers ALABAMA BIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831 BIRMINGHAM - Frigid Service & Sales, 1861 Centerpoint Rd., 35215, (205) 853-3952 BIRMINGHAM (HOMEWOOD) - D & R Appliance Company, 154 West Valley Ave., 35209, (205) 942-3959 CULLMAN - Robert G. Werner Company, 1115 4th Street S.W., 35055, (205) 734-5673 DECATUR - Peddler II, 1000 B Beltline Road, 35603, (205) 350-1044 DOTHAN - Bill’s Appliance Service, 208 Bic Road, P.O.
Authorized Service Centers ALABAMA BIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831 BIRMINGHAM - Frigid Service & Sales, 1861 Centerpoint Rd., 35215, (205) 853-3952 BIRMINGHAM (HOMEWOOD) - D & R Appliance Company, 154 West Valley Ave., 35209, (205) 942-3959 CULLMAN - Robert G. Werner Company, 1115 4th Street S.W., 35055, (205) 734-5673 DECATUR - Peddler II, 1000 B Beltline Road, 35603, (205) 350-1044 DOTHAN - Bill’s Appliance Service, 208 Bic Road, P.O.
Authorized Service Centers ALABAMA BIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831 BIRMINGHAM - Frigid Service & Sales, 1861 Centerpoint Rd., 35215, (205) 853-3952 BIRMINGHAM (HOMEWOOD) - D & R Appliance Company, 154 West Valley Ave., 35209, (205) 942-3959 CULLMAN - Robert G. Werner Company, 1115 4th Street S.W., 35055, (205) 734-5673 DECATUR - Peddler II, 1000 B Beltline Road, 35603, (205) 350-1044 DOTHAN - Bill’s Appliance Service, 208 Bic Road, P.O.
TM ® Monster Sound BIGFOOT FOR MODEL 74420 Questions? Please call Consumer Affairs toll-free at 1-800-348-0751. The trademark BIGFOOT is licensed from BIGFOOT 4 x 4, Inc. St. Louis, Missouri, U.S.A. Firestone is a registered trademark of Bridgestone/Firestone, Inc. ©1996 Fisher-Price, Inc.
