N3216 WARNING www.fisher-price.com.au IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
Important! WARNING To prevent strangulation with power cord, never place transmitter within reach of child. CAUTION This product cannot replace responsible adult supervision.
Important! • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current. • Receivers operate on AC current (use enclosed AC adaptors) or six “AAA” (LR03) alkaline batteries (batteries not included). • Adult assembly is required. • Tool needed for battery installation: Phillips screwdriver (not included).
Features 12 10 10 11 11 9 13 12 13 5 7 2 7 6 3 8 1 4 4 8 9
Features 1 Transmitter 2 Power Indicator 3 Microphone 4 Power Button 5 Night Light – press to turn on a soft glow. 6 Channel Switch 7 Receiver 8 Speaker 9 On/Off/Volume Dial – Turns power on. Set volume to a comfortable level. 10 Clip - (backside of receiver). Fasten to your clothes to stay in touch with baby around the house or yard. 11 Sound Lights - let you see baby’s sounds.
Assembly Antenna Antenna • Fit each antenna into the socket in the receiver and the transmitter. Turn the antennas to secure in place. IMPORTANT! This product is designed to operate properly with the antennas provided. To reduce the chance of potential radio interference to other users, assemble and use only the antennas provided.
Receiver Battery Installation (Optional) "AAA" (LR03) 1.5V x 3 Battery Compartment Door • Locate battery compartment door on back of receiver. • Loosen screws in battery compartment door with a Phillips screwdriver. Remove battery compartment door. • Insert three “AAA” (LR03) alkaline batteries into the battery compartment. • Replace battery compartment door. Tighten screws with a Phillips screwdriver.
Testing Sound Reception Test transmitter transmission and receiver reception each time you change location of use. Power Button • Place transmitter in room in which you intend to use it. • Press transmitter power button to turn power on. Power indicator lights. • Set transmitter channel switch to same channel as receiver. Turn on a radio.
Testing Sound Reception Power/Low Battery Indicator On/Off/Volume Dial • Place a receiver in rooms in which you intend to use each. • Turn on/off/volume dial to turn power on. Power/low battery indicator lights. Adjust receiver location for best reception. Hint: If battery power is low, the power/low battery indicator turns orange. Replace batteries with three, new alkaline “AAA” (LR03) batteries or use AC adaptor for power source.
Testing Sound Reception Adjust Channel • Sound lights turn on when sound is received by a receiver. - One or two lights for shallow sounds - Three or more lights for louder sounds. • If you experience interference (buzzing or static, etc.) while using one channel setting, switch all units to other channel. Selecting a channel is usually a one time adjustment. Hint: You will see all five sound lights: - If you turn receiver power on before transmitter power. You will also hear static noise.
Setup & Use IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 8). Adjust Channel • Set transmitter channel switch to same channel as receiver.
Setup & Use • Place transmitter in same room with child. Point microphone directly toward crib/cot or play area. • Unwrap and fully extend power cord for best transmission. Plug power cord into wall outlet. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling light. • Press transmitter power button to turn power on. • Press night light on transmitter for a soft, glowing light. (Press again to turn off night light.
Setup & Use • Place receiver where you will see or hear it. • Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor jack into receiver socket and plug into wall outlet. Note: To use batteries as a power source, refer to instructions on page 7. • Rotate receiver on/off/volume dial to turn power on. Power/low battery indicator lights. Rotate on/off/volume dial to adjust volume.
Setup & Use • Clip to your clothes to stay in touch with baby around your house or yard.
Problems & Solutions Problem You hear static or buzzing Solution Receiver is out of range of transmitter. Move receiver closer to transmitter. Note: Range varies depending on surrounding conditions such as noise levels, physical obstructions and signal interference. Transmitter power is off. Turn transmitter power on. Channel switches are on different channels. Make sure channel switches on both transmitter and receiver are set to same channel. Loose power cord connection and transmitter power is off.
One (1) Year Limited Warranty Mattel Australia Pty., Ltd., (658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia) warrants to the original owner that this product is free from all defects in material and workmanship when used under normal conditions for a period of one (1) year from the date of purchase. Should the product fail to perform properly, we will repair replace it at our option, free of charge.