Baby Toy User Manual

ManualsBrandsFisher-Price ManualsBicycleNICK JR DORA THE EXPLORER J5242

J5242

Please keep this instruction sheet for

future reference, as it contains important information.

Adult assembly is required.

Requires three "AA" batteries (included).

Tools needed for assembly: Phillips Screwdriver, Hammer and

Scrap Block of Wood (not included).

Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg).

Product features and decoration

may vary from the photograph.

www.ﬁ sher-price.com

Summary of content (8 pages)

PAGE 1
J5242 Product features and decoration may vary from the photograph. Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires three "AA" batteries (included). Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Age: 2 - 6 years; Weight Limit: 60 lbs (27 kg). www.fisher-price.
PAGE 2
Parts IMPORTANT! • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call toll-free 1-800-432-5437, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. • Some parts shown are assembled to both sides of the trike. CAUTION This product contains small parts in its unassembled state. Adult assembly is required.
PAGE 3
Assembly Rear Wheel (Indented Side Up) Cap Nut Hubcap (Peg Side Down) Straight Axle Straight Axle Cover Frame Cap Nut Rear Wheel (Indented Side Down) Cap Nut Assembly Tool Hubcap Hubcap (Peg Side Up) Scrap Block of Wood Assembled Rear Wheel Straight Axle 1 3 Scrap Block of Wood Cap Nut Assembly Tool BOTTOM VIEW • Fit a cap nut into the cap nut assembly tool. Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer.
PAGE 4
Assembly Pedal Hubs Pedal Pedal Axle Front Wheel Pedal Axle Hole 5 Scrap Block of Wood • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. 7 • Fit a pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure.
PAGE 5
Assembly FIRST, Insert the screw so that 3/4" is visible. THEN, tighten the screw. 3 / 4" Handlebar Handlebar Frame Neck Fork Post Tab Basket Fork Cover Rear of Trike 9 11 • Fit the basket on the tab on the front of the handlebar. • Insert two #8 x 3/4" screws into the top of the basket and tighten. • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.
PAGE 6
Attaching the Seat Label Decoration Helpful Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fit on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down.
PAGE 7
Removing the Seat Battery Replacement For best performance, we recommend replacing the batteries that came with this trike with three, new alkaline "AA" (LR6) batteries. Seat Basket Seat Retainer Tab Frame Seat Retainer Tab 1 • Loosen and remove the two screws in the basket. Remove the basket. • Turn the frame on its side. • Squeeze the seat retainer tabs toward one another and lift the seat from the frame.
PAGE 8
Consumer Information Let's Go! WARNING To avoid serious injury: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Left Turn Signal Right Turn Signal Motorcycle Sounds Power Music Horn Weather Report • Check the plastic parts regularly and if broken or cracked, dispose of them properly.