T3640 www.fisher-price.co.uk WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
Important! DANGER To prevent electric shock, do not immerse in water or expose to rain or moisture; wipe clean with damp cloth. WARNING To prevent strangulation with power cord, never place transmitter within reach of child. CAUTION This product cannot replace responsible adult supervision.
Important! • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current. • Receiver operates on AC current (use enclosed AC adaptor) or three “AAA” (LR03) alkaline batteries (batteries not included). • Adult assembly is required. • Tool needed for battery installation: Phillips screwdriver (not included).
Features 12 10 11 9 2 5 13 7 6 3 8 4 1 4
Features 1 Transmitter 2 Power Indicator 3 Microphone 4 Power Button 5 Night Light – press to turn on a soft glow. 6 Channel Switch 7 Receiver 8 Speaker 9 Power/Volume Dial – Turns power on. Set volume to a comfortable level. 10 Clip - (backside of receiver). Fasten to your clothes to stay in touch with baby around the house or yard. 11 Sound Lights - let you see baby’s sounds.
Assembly Antenna Antenna • Fit each antenna into the socket in the receiver and the transmitter. Turn the antennas to secure in place. IMPORTANT! This product is designed to operate properly with the antennas provided. To reduce the chance of potential radio interference to other users, assemble and use only the antennas provided.
Receiver Battery Installation (Optional) "AAA" (LR03) 1,5V x 3 Battery Compartment Door • Locate battery compartment door on back of the receiver. • Loosen screws in battery compartment door with a Phillips screwdriver. Remove battery compartment door. • Insert three “AAA” (LR03) alkaline batteries into the battery compartment. • Replace battery compartment door. Tighten screws with a Phillips screwdriver.
Testing Sound Reception Test transmitter transmission and receiver reception each time you change location of use. Power Button • Place transmitter in room in which you intend to use it. • Press transmitter power button to turn power on. Power indicator lights. • Set transmitter channel switch to same channel as receiver. Turn on a radio.
Testing Sound Reception Power/Volume Dial Power/Low Battery Indicator • Place the receiver in the room in which you intend to use it. • Turn power/volume dial to turn power on. Power/low battery indicator lights. Adjust receiver location for best reception. Hint: If battery power is low, the power/low battery indicator turns orange. Replace batteries with three, new alkaline “AAA” (LR03) batteries or use AC adaptor for power source.
Testing Sound Reception Adjust Channel • Sound lights turn on when sound is received by the receiver. - One or two lights for shallow sounds - Three or more lights for louder sounds. • If you experience interference (buzzing or static, etc.) while using one channel setting, switch both units to other channel. Selecting a channel is usually a one time adjustment. Hint: You will see all five sound lights: - If you turn the receiver power on before transmitter power. You will also hear static noise.
Setup & Use IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 8). Adjust Channel • Set transmitter channel switch to same channel as the receiver.
Setup & Use • Place transmitter in same room with child. Point microphone directly toward crib/cot or play area. • Unwrap and fully extend power cord for best transmission. Plug power cord into wall outlet. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling light. • Press transmitter power button to turn power on. • Press night light on transmitter for a soft, glowing light. (Press again to turn off night light.
Setup & Use • Place the receiver where you will see or hear it. • Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor jack into receiver socket and plug into wall outlet. Note: To use batteries as a power source, refer to instructions on page 7. • Turn the receiver’s power/volume dial to turn power on. The power/low battery indicator lights. Turn the power/volume dial to adjust the volume.
Setup & Use • Clip the receiver to your clothes to stay in touch with baby around your house or yard.
Problems & Solutions Problem You hear static or buzzing Solution Receiver is out of range of transmitter. Move receiver closer to transmitter. Note: Range varies depending on surrounding conditions such as noise levels, physical obstructions and signal interference. Transmitter power is off. Turn transmitter power on. Channel switches are on different channels. Make sure channel switches on both transmitter and receiver are set to same channel. Loose power cord connection and transmitter power is off.
Care Excess dirt in transmitter microphone will hamper transmission of sound. Clean outer surface of transmitter and receiver with a cloth lightly dampened with a mild cleaning solution. Never immerse transmitter, receiver or AC adaptor. Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
