T8822 Please keep this instruction sheet for future reference, as it contains important information. Product features and decorations may vary from the photograph. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Requires three "AA" batteries (included). Age: 2-6 years. Weight limit: 60 lbs (27 kg). www.fisher-price.
Consumer Information WARNING TO AVOID SERIOUS INJURY: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes. • Never allow more than one rider. #8 x 3/ 4" Screw – 4 #6 x ½" Screw – 2 #8 x 3" Screw – 1 Cap Nut – 1 FASTENERS SHOW ACTUAL SIZE • Please save all packaging material until assembly is complete to ensure that no parts are discarded.
Assembly CAUTION Rear Wheel (Indented Side Up) Cap Nut This product contains small parts in its unassembled state. Adult assembly is required. Hubcap (Peg Side Down) Cover Straight Axle Frame Hubcap Assembled Rear Wheel Rear Wheel (Indented Side Down) Hubcap (Peg Side Up) Cap Nut Assembly Tool • Turn the frame on its side with the exposed end of the straight axle up. • Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut.
Assembly Pedal Hubs Pedal Axle Front Wheel Pedal Hole Pedal Axle 5 • While holding the pedal hubs on the pedal axle, insert the pedal axle through the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. Scrap Block of Wood 7 Pedal Hub • Fit the pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure.
Assembly Slot Handlebar Headlight Cover Frame Neck Fork Post Fork Cover Rear of Trike 9 11 • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.
Label Decoration (Place label 6 on opposite side) 2 8 Attaching the Seat Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fit on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down.
Battery Replacement Battery Safety Information Note: For best performance, we recommend replacing the batteries that came with this trike with three, new "AA" (LR6) alkaline batteries. In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Removing the Seat Consumer Information Seat CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Seat Retainer Tab Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.