Operation Manual

48
Troubleshooting
Problem Cause Solution
Camera will not
take photos
Batteries are weak
or exhausted
Replace the batteries in the camera
with four, new “AAA” (LR03)
alkaline batteries.
Camera is turned off Press the power button on the back
of the camera to turn it on.
Camera memory is full of
images (
appears on
the LCD screen)
Download pictures to your computer
or use the image delete button on the
camera to remove some of them.
Photos are blurry Lens may be dirty or
smudged
Clean the lens with a soft cloth.
Camera moved when
picture was taken
Try to keep the camera steady when
you take pictures.
You are too close to your
subject
The focus range is from about
4 ft. (1,2 m) - infi nity
Cannot transfer
photos to the
computer
USB cord may not be
properly connected
Check cord connections on both
your camera and your computer.
Product functions
erratically or does
not function at all
Static electricity may
temporarily stop the
electronic function of
the camera and cause
picture loss. For example,
walking across the
rug and touching the
camera may create static
electricity.
Reset the electronics by removing
the batteries and putting them back
in the battery compartment.
Batteries are weak
or exhausted
Replace the worn batteries with four,
new “AAA” (LR03) alkaline batteries.