User Manual

3
Straight Axle Assembly
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the rear of
the frame.
• Turn the assembly upright.
• Slide a bushing, smooth side  rst, onto the end of the
straight axle.
• Slide a wheel,  at side  rst, onto the end of the straight axle.
• Slide a wheel hub, pointed end  rst, onto the end of the
straight axle.
Bushing
(Smooth Side First)
Wheel Hub
(Pointed End First)
Wheel
(Flat Side First)
Straight Axle
• Fit the tabs on the wheel cap into the slots in the wheel hub.
Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to the other
wheel hub.
• Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs
 t into the slot in each pedal hub.
• Press the pedal hubs into the center of the front wheel until they
are  ush with the surface of the front wheel.
• Repeat this procedure on the other side of the front wheel
assembly to assemble the other two pedal hubs.
• Fit a .354" (0,9 cm) cap nut on the end of the straight axle.
Hint: You may need the help of another adult to hold the other
end of the straight axle in place.
• Tap the cap nut with a hammer. Gently pull the rear wheel to
be sure the cap nut is securely attached to the straight axle.
Wheel Hub
Wheel Cap
Pedal Hubs
• Place the front wheel assembly between the fork arms. Make
sure the pedal axle  ts into the groove at the bottom of each
fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" (1,9 cm) screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the other
fork arm.
Fork Arms
Pedal Axle
Groove
Fork Cover
#8 x ¾" (1,9 cm)
Screws
.354" (0,9 cm)
Cap Nut
Front Wheel
Assembly
3
Bottom View
4
5
6
7
8
Pedal Axle
Tabs