Riding Toy User Manual

H4435pr-0920

ASSEMBLY

K4564pr-0923

Holder

• Using safety scissors, cut the plastic tie holding Backpack in the

holder. Remove Backpack from the holder.

Note to Retailer: Do not remove the plastic tie. Simply lift Backpack

from the holder and assemble the holder to the top edge of the

vehicle. Replace Backpack in the holder.

Backpack

• Fit the holder to the top edge of the vehicle as shown.

• Insert a #10 x 1" screw into the holder and tighten.

• Replace Backpack in the holder.

• Fit the spacers between the upper holes of the brush

guard and the front end of the vehicle .

• Insert two #8 x 4" screws through the two upper holes

in the brush guard, through the spacers and into the

front end of the vehicle . Tighten the screws.

Spacers

#8 x 4" Screws