Manual

SEARCH MODES

Autotune Search Mode

Press the AUTO/I.D. pad to place the LCD marker over AUTO.

Now you're in a very sensitive, widescan, all-metal, motion

search mode. Since this mode responds to all metal targets

and does not have the ability to identify or reject targets, this

will probably not be your normal search mode. The AUTOTUNE

mode has some advantages, however, that make it useful to

use in at least two situations:

1. Non-Trashy Areas: Because the Autotune

mode has a wider scan than the I.D. mode, you

are less likely to miss a good target when

searching in the Autotune mode. To realize the

benefits of the Autotune mode, search in the

Autotune mode until you find a target. Pinpoint

the target using the SEARCH/PINPOINT pad and

then push the AUTO/I.D. touch to switch to I.D.

mode and identify the target.

2. Highly Mineralized Sand and Soil: The Autotune

mode is recommended for black- or gray-sand

beaches or highly mineralized soil. Under these

conditions it may be necessary to lower the

Sensitivity level by pressing the SENS pad and the

left Arrow touch pad. Now sweep the search

coil several inches off the ground. Gold nuggets

Your CZ-7a Pro has two search modes: Target I.D. and

Autotune. Both search modes are "motion" modes, meaning

the search coil must be moving to detect a target.

LCD when

Autotune mode

is selected and

Target I.D. is

deselected.