- Sanyo Fisher Co. INSTRUCTIONS MANUAL Multiplexer MPX-CD163, MPX-CD93

VIEWING RECORDED IMAGES
Example: To zoom in on a specific part of the camera 2 image
You can use the zoom frame that appears on the screen to select the position you wish to enlarge. The zoom frame is set initially at
the center of the screen.
Press camera select button 2.
The camera 2 image will appear in a single-screen display.
Press the ZOOM button.
The images will be enlarged.
Press and hold camera select button 2 for about 3 seconds or
more.
The zoom will be canceled and the normal image will appear, and the zoom
frame (G) will appear on the screen.
Note: If the zoom frame remains on the screen for about 10 seconds without
being adjusted, the screen will return to zoom display.
To make the zoom frame reappear, press and hold camera select button
2 again for 3 seconds or more.
Press the cursor button to determine the position you wish to
enlarge.
Press camera select button 2 one more.
The area of the image inside the zoom frame will be enlarged.
Note: If you press the STILL button while the images are being zoomed, an
enlarged still image will be displayed.
Press the ZOOM button once more to return the enlarged image to
the normal image.
The zoom will be canceled and normal images will appear.
2
1
ZOOM
2
2
3
4
2
5
ZOOM
6
– 24 –
English