- Sanyo Fisher Co. INSTRUCTIONS MANUAL Multiplexer MPX-CD163, MPX-CD93

CONTROL SET SETTINGS
The following settings must be made if using the RS-232C connector or the RS-485 connector for serial communication between a
computer or a system controller and the multiplexer.
(CONTROL SET)
DATA SPEED 19200
ALARM SEND ON
RS232C/RS485 RS232C
CAMERA CONTROL SANYO *
(MAIN MENU)
1 LANGUAGE *
2 CLOCK SET *
3 DISPLAY SET *
4 VCR SET *
5 ALARM SET *
6 SECURITY SET *
7 CONTROL SET *
8 ALARM DATA *
(*:NEXT)
• Set a data transfer rate for serial communication.
• Set whether alarm information will be sent or not.
• Set whether RS-485 or RS-232C will be used for
serial communication.
Make dome-type camera settings to enable power
and signal control with a RS-485 dedicated coaxial
cable.
CONTROL SET settings
Settings for serial communication between the computer and
system controller using RS-232C connectors and RS-485
connectors.
Press the MENU button.
The MAIN MENU screen will be displayed.
Use the cursor button to select
“CONTROL SET” and then press
the NEXT button.
The CONTROL SET screen will be
displayed.
Use the cursor button to select
RS232C/RS485 “RS232C”, and then
press the setting buttons to select
“RS232C” or “RS485”
Display examples:
• When RS-232C is selected
Use a commercially available RS-232C cable for the
connection between the RS-232C connectors of this unit and
a personal computer.
• When RS-485 is selected
Use a modular cable or a twisted-pair cable for the
connections between the RS-485 control connectors of this
unit, the system controller and the digital video recorder.
MENU
1
(MAIN MENU)
1 LANGUAGE ¤
2 CLOCK SET ¤
3 DISPLAY SET ¤
4 VCR SET ¤
5 ALARM SET ¤
6 SECURITY SET ¤
7 CONTROL SET ¤
8 ALARM DATA ¤
(*:NEXT)
NEXT
2
(CONTROL SET)
DATA SPEED 19200
ALARM SEND ON
RS232C/RS485 RS232C
+–
3
(CONTROL SET)
DATA SPEED 19200
ALARM SEND ON
RS232C/RS485 RS232C
Use the cursor button to select
DATA SPEED “19200”, and then
press the setting buttons to set the
communication speed.
This sets the data communication speed
for serial communication.
Use the cursor button to select
ALARM SEND “ON”, and then press
the setting buttons to select the
alarm data.
Display examples:
• OFF: Alarm data is not transmitted.
• ON: Alarm data is transmitted.
6
Press the MENU button.
This completes the settings.
+–
4
(CONTROL SET)
DATA SPEED 19200
ALARM SEND ON
RS232C/RS485 RS232C
CAMERA CONTROL SANYO *
2400, 4800, 9600, 19200
+–
5
(CONTROL SET)
DATA SPEED 19200
ALARM SEND ON
RS232C/RS485 RS232C
CAMERA CONTROL SANYO *
– 72 –
English