INSTRUCTION MANUAL B/W Video Monitor VM-6609 VM-6612 VM-6614 VM-6619
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 INFORMATION TO USER FCC COMPLIANCE STATEMENT WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS. FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operating 12. LIGHTNING -- For added protection for video monitor or instructions should be read before the appliance is operated. equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 PRECAUTION CONTENTS If an abnormality does occur, turn the power switch off and unplug the unit. Have a qualified technician perform any repairs. PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . 4 Do not use the monitor if it makes a strange noise, emits a strange odor, or if smoke comes out from it Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . .
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 PARTS NAMES Front Panel 1 1 Monitor Selector Switch (VIDEO A/B) Turn this Monitor selector switch A position for a signal fed through the rear panel VIDEO A connectors. Then, turn this Monitor selector switch B position for a signal fed through the rear panel VIDEO B connectors. 2 Contrast Control (» CONTRAST) Turn to adjust picture contrast according to your requirement.
PARTS NAMES Rear Panel VM-6609 1 VM-6614 4 1 56 VM-6612 4 2 VM-6619 1 1 AC input socket (AC INPUT) Connect the AC power cord (supplied) securely to this socket and to a wall outlet. 2 Video input terminals (VIDEO IN) These terminals are used to input a video signal source to this monitor. Connect to the video output of a VCR or another monitor (for loop through connection) or to a video camera.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 CONNECTION Before connecting your system, make sure that all units are turned off. The picture signal source can be connected to either the A or B terminal at the rear of the monitor. The monitor selector switch at the front of the monitor can be used to select the input terminal used.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 BASIC OPERATION 1 Press the POWER switch to turn on the power. ON: The power is turned on (the POWER indicator is lit). OFF: The power is turned off (the POWER indicator is off). 2 Select the picture input. Use the monitor selector switch at the front of the monitor to select the picture being input to either the A or B input terminal.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a SANYO-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the power on.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 SPECIFICATIONS VM-6609 System Picture tube Resolution Scanning frequency VM-6612 VM-6614 VM-6619 EIA standard 9" measured 12" measured 15" measured 20" measured diagonally, 90˚ diagonally, 90˚ diagonally, 90˚ diagonally, 90˚ deflection angle deflection angle deflection angle deflection angle More than 800 TV lines (center) More than 1000 TV lines (center) Horizontal: 15.
L8MAA/US (VMC-6609, 6612, 6615, 6620 GB) 2000. 11. 21 SANYO INDUSTRIAL VIDEO VIDEO MONITOR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
