- Sanyo Fisher Co. INSTRUCTION MANUAL Digital Movie Camera VPC-HD700EX, VPC-HD700, VPC-HD700GX

English 114
NORMAL/SHOOTING
2 Select the desired icon from the
exposure menu, and press the
SET button.
<If T, g or , was
selected>
1 Toggle the SET button up or
down to select ND filter,
aperture value or shutter
speed.
2 Toggle the SET button left or
right to change the setting for
the selected parameter.
3 Press the SET button.
h This completes the exposure setting.
HINT
i To prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
i A slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
i To minimize noise in the image, enable the noise reduction function
(page 151).
i The exposure setting automatically becomes @ if the scene select
function is active.
i In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i Even if the shutter speed is set to slower than 1/59 sec., the shutter speed
during video clip recording is 1/60 sec.
i If the exposure setting is set to T, g or H, by assigning an operation
shortcut to the SET button (page 149), you can select the T, g or H
exposure setting from the Shooting Screen.
F3.5
1/500
Shutter speed
Aperture
ND filter