Manual

a s p h a l t , t i l e , e t c , a s w e l l a s l i s t e n i n g t o w a t e r l e a k s u n d e r t u rf o r

On hard sur faces, the muti-

sensor sensor is used to pick up

the vibrations generated by a

buried ruptured pipe located

underneath sidewalks or paved

streets. The rubber housing

diaphragm is designed to reduce

external sounds while the sensor

rests on a hard surface and

detects the vibrations traveling

underground.

When utilizing the multi-sensor for

direct connection to a pipe, or

listening to buried pipes located

in soft ground or under a turf

surface, you will need to use the

T-Handle and sound rods included

with the unit. Using a threaded

spacer provided on the extension

handle, carefully attach it directly

onto the Multi-Sensor. Assemble

the T- Handle by snapping both

the extension handle and sensor

handle sections together. Sound

rods are then secured to the

threaded coupler on the T- Handle

assy. Sound rod lengths will be

determined by its application.

XLT-17 MANUAL-8700725 CS2.indd 4 11/6/06 4:02:48 PM

INSTRUMENT SET

Use of the Multi-Sensor

The multi-sensor was designed for locating leaks in all types of

surface conditions. The new sensor construction will allow leak

detection to be performed on hard surfaces such as concrete,

asphalt, tile, etc, as well as listening to water leaks under turf or

soft surfaces.