User Manual

11
Specifi cations
Input impedance: 10M Ohms
Input trim gain range: -6dB to +14dB
Amp Output:
Level: -∞ to +6dBV
Output Impedance: 1k Ohms
XLR D.I. Output:
Level (pre EQ): -10dB relative to input
Level (post EQ): -6dB relative to input
Output Impedance: 600 Ohms
Baseline noise: -93dBA
Dynamic range: 100dBA
Tone Controls:
Low Cut control: 30Hz, 80Hz, 160Hz
Bass control: ±12dB @ 150Hz (guitar)
±12dB @ 115Hz (bass)
Middle control: ±12dB @ 200Hz to 3.1kHz; Q = 1.3
Treble control: ±12dB @ 6kHz (guitar)
±12dB @ 3kHz (bass)
Power:
Power supply: 9V battery, Phantom power, 9V adapter
Typical in-use current consumption: 7mA
Typical 9V battery life: 70 hours using alkaline battery
9V adapter: Fishman 910-R (for 110V)
or suitable  ltered and regulated,
200mA type, tip = negative
All speci cations subject to change without notice.