User Manual

14
Specifi cations
Input impedance: 10M Ohm
Input trim gain range: -10dB to +2dB
Nominal Output impedance: 3.5k Ohm
Max. Output level (onset of clipping): +2.4dBV
Digital signal path:
A/D, D/A conversion: 24-bit
Signal processing: 32-bit
Baseline noise: -92dBV
(
A-weighted
)
Dynamic range: 94dB
(
A-weighted
)
Power supply: 9V battery or 9VDC adapter
Typical in-use current consumption: 18mA
Typical 9V battery life: 27 hours using alkaline battery
54 hours using lithium battery)
9V adapter (optional): Fishman 910-R
(
for 110V
)
or suitable fi ltered & regulated,
200mA type, tip = negative
5.5mm O.D., 2mm I.D.
Phase switch: Left position = non-inverting
All specifi cations subject to change without notice