INSTRUCTION MANUAL BATTERY TP FIT 36 V 500010 | 500016 NETWORKED CUSTOMISED INTELLIGENT Biketec GmbH Luzernstrasse 84 CH-4950 Huttwil T +41 62 959 53 00 info@biketec.ch fit-ebike.
INSTRUCTION MANUAL TP FIT 36 V TABLE OF CONTENTS 1 PREFACE 3 2 ABOUT THESE OPERATING INSTRUCTIONS 2.1 MANUFACTURER . . . . . . . . . . . . . . . . . . . 2.2 LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . 2.3 DECLARATION OF CONFORMITY . . . . . . . . . . 2.4 ON INFORMATION . . . . . . . . . . . . . . . . . . 2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS . . . . . 4 4 4 4 4 4 3 SAFETY INSTRUCTIONS 3.1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTION MANUAL TP FIT 36 V 11 RECYCLING AND DISPOSAL 16 11.1 DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 FIT_Manual_Battery_TP_36V_V1_en | Version 01 | 04.04.
INSTRUCTION MANUAL 1 TP FIT 36 V PREFACE Dear FIT customer, The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system. Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start. We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it. Thank you for placing your trust in FIT. Your FIT Team FIT_Manual_Battery_TP_36V_V1_en | Version 01 | 04.04.
INSTRUCTION MANUAL 2 TP FIT 36 V ABOUT THESE OPERATING INSTRUCTIONS 2.1 MANUFACTURER Biketec GmbH Luzernstrasse 84 CH-4950 Huttwil fit-ebike.com/en-en/ 2.2 LANGUAGE The original operating instructions are written in German. A translation is invalid without the original operating instructions. 2.3 DECLARATION OF CONFORMITY Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
INSTRUCTION MANUAL 3 TP FIT 36 V SAFETY INSTRUCTIONS 3.1 GENERAL INFORMATION Please read all safety instructions carefully. Failure to comply with the warnings or to take residual risks into account may result in electric shock, fire and/or serious injury. Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
INSTRUCTION MANUAL 4 TP FIT 36 V PRODUCT AND TECHNICAL SPECIFICATIONS 4.1 TP 36 V FIT TP batteries blend stylishly into the down tube and can be easily inserted or removed without any tools. The batteries are interchangeable thanks to their plug-and-play system. The battery can be conveniently charged while in the bike or when removed. Safe and reliable in their operation, the batteries are perfectly matched to the FIT system. 1. Battery level indicator 2. Charging socket 4.
INSTRUCTION MANUAL TP FIT 36 V 4.4 TECHNICAL DATA 4.4.1 TP FIT 36 V Rechargeable battery TP 500 FIT 36 V TP 630 FIT 36 V Product code Cell configuration Capacity (minimum) Energy (nominal) Voltage (nominal) Charging current (nominal) Discharging temperature Charging temperature Storage temperature (recommended) Weight about Ah Wh V A °C °C °C 500010 10S4P 13.4 500 36 6 -10 to +60 0 to +45 10 to +25 500016 10S5P 16.7 630 36 6 -10 to +60 0 to +45 10 to +25 kg 3.3 3.
INSTRUCTION MANUAL 5 TP FIT 36 V TRANSPORTATION AND STORAGE 5.1 TRANSPORTATION Exclamation-Triangle 5.1.1 CAUTION Remove battery before transportation. There is a risk of injury if the drive system is switched on unintentionally. TRANSPORTING E-BIKES Never use bicycle racks which use the e-bike’s handlebars or frame to hold the e-bike in an upside-down position. They can exert inadmissible forces on components during transportation. This can cause the supporting parts to break.
INSTRUCTION MANUAL TP FIT 36 V 5.3 BREAK IN OPERATION INFO-CIRCLE NOTICE The battery discharges when not in use. This can cause irreparable damage to the battery. The battery must be recharged every 6 months. The battery may become damaged if it is connected permanently to the charger. Never connect the battery to the charger permanently. If you remove the e-bike from service for longer than four weeks, you need to prepare it for a break in operation. 5.3.
INSTRUCTION MANUAL 6 TP FIT 36 V FITTING 6.1 FITTING THE BATTERY 6.1.1 INSERTING THE BATTERY 1. First insert the lower section of the battery. 2. Ensure that the locking mechanism is open. 3. Push the battery upwards into its end position. The engaged slider holds the battery in position. 6.1.2 REMOVING THE BATTERY 1. Open the locking mechanism. 2. Tilt the top part of the battery forwards. 3. Remove the battery from the e-bike. 7 OPERATION 7.1 CHARGING THE BATTERY 7.1.
INSTRUCTION MANUAL TP FIT 36 V 7.2 DISPLAY AND SETTINGS 7.2.1 CHARGE LEVEL CHECK ON BATTERY 1. Battery level LEDs Indicate how much e-bike battery capacity is left. An error code is displayed in the event of a fault. You will find the error table later in these instructions. 2. Checking button for the battery level Lights up the battery charge LEDs to check the remaining battery capacity or a possible fault with the battery itself.
INSTRUCTION MANUAL 8 TP FIT 36 V ERROR MESSAGES 8.1 BATTERY ERROR CODES Flash sequence for the battery charge level LEDs after pressing the battery charge level button Description Action Permanent Error The battery has a permanent error. The battery needs to be replaced. Take your e-bike to your specialist dealer. The battery is considered to have an unknown defect in this state and must not be transported in a vehicle or by air. It is best if you contact your dealer.
INSTRUCTION MANUAL 9 TP FIT 36 V CLEANING AND SERVICING 9.1 BASIC CLEANING 9.1.1 CLEANING THE BATTERY Exclamation-Triangle CAUTION Risk of fire and explosion due to penetration by water The battery is only protected against simple spray water. Penetration by water can cause a short circuit. The battery may self-ignite and explode. Never clean the battery with a pressure washer, water jet or compressed air. Keep contacts dry and clean. Never immerse the battery in water. Never use cleaning agents.
INSTRUCTION MANUAL 10 TP FIT 36 V TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR 10.1 TROUBLESHOOTING AND FAULT CLEARANCE 10.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP If the display and/or the drive system do not start up, proceed as follows: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Check whether the battery is inserted correctly. If it is not, insert the battery correctly. Start the drive system. If the drive system won’t start, remove the battery. Clean all the contacts with a soft cloth.
INSTRUCTION MANUAL TP FIT 36 V Symptom Cause Remedy The assisted journey distance is too short. The battery does not perform as well in winter weather. This does not indicate a problem. The journey distance can be shorter depending on the road conditions, the level of assistance and the total light usage time. 1. Check battery is charged. 2. Recharge the battery if it is almost flat. Is the battery fully charged? 3.
INSTRUCTION MANUAL 11 TP FIT 36 V RECYCLING AND DISPOSAL 11.1 DISPOSAL Mechanical and electrical devices, accessories and packaging should be taken for recycling in an environmentally responsible manner.