User Manual

FITBENCH | W1236 Industrial Drive Ixonia, WI 53036 | FITBENCH.COM
3. Damages from improper use of fitness accessories, whether sold with FITBENCH or sold
separately, such as adjustable or standard dumbbells or kettlebells, resistance bands or
other fitness or recovery fitness devices.
4. Any damage occurring during shipping (claims should be presented to the carrier).
5. Any damage to FITBANDS® due to over-extension or inadequate anchoring.
6. Any damage due to a failure to follow general maintenance requirements.
WARRANTY CLAIM PROCEDURE: The customer must contact the authorized
FITBENCH® Representative for approval prior to shipping. The customer will be
responsible for shipping charges to FITBENCH in order to obtain warranty
assistance. The Customer shall include, with the return shipment, a copy of the original
bill of sale or receipt or other satisfactory proof of purchase as well as a short, detailed
description of the problem. FITBENCH will pay return shipping charges if the repairs
are covered under this warranty.
GERNERAL MAINTENANCE - The consumer must perform, or have performed,
the following maintenance in order to keep the warranty in effect:
Composite Top:
• To ensure prolonged life and proper hygiene of the FITBENCH top, the entire FITBENCH
composite top should be wiped clean with a damp cloth after every workout.
• Periodically take the time to use a mild soap or an approved disinfectant to clean the composite
top. Avoid using any abrasive cleaners.
• Replace ripped or worn FITBENCH ONE composite top immediately.
• Keep sharp or pointed objects clear of the FITBENCH ONE composite top.
• Always inspect hinge screws and anchor point screws under the top to make sure they are
snug/tight.
Locking Feet/Wheels:
• Locking feet MUST BE engaged when performing exercises on or with the bench.
• Check to make sure feet are all the way raised prior to moving before use.
• When moving the bench, be sure to pick up the bench if it is being moved over door thresholds,
gravel, potholes, or any other non-smooth surface.
• Shoes must be worn when engaging locking. Hands should not be used when engaging or
disengaging the locking feet.
Decals:
• Inspect and familiarize yourself with any safety warnings or other user information posted on each
decal.
Nuts and Bolts:
• Inspect all nuts and bolts for any loosening and tighten if needed. Go through a re-tightening
sequence periodically to ensure that all nuts and bolts are tightened properly. Loctite can be used
to ensure screws stay tight.
This is the exclusive warranty applicable to your FITBENCH products. Please read the
terms and limitations of this warranty.
Additional warranty on accessories, parts can be purchased online at fitbench.com.
Thank you and welcome to the #FITBENCHFamily!