User Manual

FITBENCH | W1236 Industrial Drive Ixonia, WI 53036 | FITBENCH.COM
GENERAL MAINTENANCE INFORMATION
Vinyl Top:
• To ensure prolonged life and proper hygiene of the FITBENCH® top, the entire
FITBENCH vinyl top should be wiped clean with a damp cloth or nonabrasive
cleaning solution after every workout.
• Replace ripped or worn FITBENCH FLEX vinyl top immediately. Replacement
tops can be found at FITBENCH.com.
o FITBENCH ONE tops can also be used as a replacement on the
FITBENCH FLEX to give your bench an upgrade.
• Keep sharp or pointed objects clear of the FITBENCH FLEX vinyl top.
• Always inspect hinge screws to ensure they are snug/tight.
o Loctite can be used to ensure screws stay tight.
• Always inspect anchor point screws to ensure they are snug/tight.
Decals:
• Inspect and familiarize yourself with any safety warnings or other user
information posted on each decal.
Screws:
• Inspect all screws for any loosening and tighten if needed. Go through a re-
tightening sequence monthly to ensure that all screws are tightened properly.
• Loctite can be used to improve screw’s security.
Wheels/Feet:
• Make sure to remove weights from bench before moving the bench.
• Feet on the FITBENCH FLEX are made to adjust for uneven surfaces – done by
adjusting the height of the feet and locking with nut back into desired position.
• If the bench needs to be moved over a door threshold, pothole, etc., more than
one person will be needed to lift and carry the bench safely. The wheels on all
FITBENCHs were designed to perform on flat surfaces that are free of
debris/pebbles/sand/etc.
Check out
www.fitbench.com/train to download the FITBENCH Train app
for exercise ideas, training plans, various workouts, and exclusive
discounts for our subscribers. Additional workout ideas can be found on our
YouTube page (
https://youtube.com/fitbench).