Owner's manual

8. The setup software will show all visible networks in range. Select your network

from the list. If your network is password-protected, enter your password in

the box to the right and click Connect. Enter the wireless network password

and tap Submit.

NOTE: If your network is hidden, select "Join Other Network.” Enter your

network’s name and password, then tap Join.

9. When you’ve submitted the correct password, your scale will save the network

credentials, join your Wi-Fi network, link to your Fitbit.com Dashboard, and

show a checkmark once linking is successful.

10. Ensure that your mobile device has switched back to your home network and

tap I’m Connected! Mobile setup is now complete.

Verifying your scale setup

Now that you’ve linked your scale to your Fitbit.com account, you’ll want to verify

that the scale appears correctly on your profile.

1. Go to http://www.fitbit.com/login.

2. Login to your Fitbit.com account.

3. Click the gear icon at the top-right, and look for the Aria listed in the drop-

down menu.

If you don’t see your scale in this menu, your setup may not have completed properly

or you may be logged into a Fitbit.com account that is not associated with your

scale.

See http://www.fitbit.com/support for further troubleshooting.

Changing your Wi-Fi network

If you’ve altered the name, password, router, or provider of your network, you’ll need

to reconnect your Aria to the updated network using one of the above setup

methods.

In this case, you may find that your scale does not display “Setup Active” after you

remove and then reinsert a battery. It may instead display the name of your previous

network followed by “Tap to change.”

When you see the “Tap to change” message appear, press briefly and firmly on the

two corners farthest from the display to put it in “Setup Active” mode. If the scale’s

display goes blank or displays measurement information, you’ll need to remove and

reinsert a battery and attempt this again.

When the scale reads “Setup Active,” you can continue with the setup as described

above.