User's Manual

9
a. Select Get started if you don’t already have a Fitbit.com account.
b. Select Log in to log into your existing Fitbit.com account.
NOTE: You can only have one Fitbit tracker paired to an account at any
given time.
If you currently have another Fitbit tracker linked to your account
and plan to continue using it, choose Don’t Replace to continue
setup using a different email address.
If you’d like to use your Flex on your existing account, choosing
Replace Tracker remove your other tracker, and replace it with your
Flex.
3. Enter your personal details and select Next. This information personalizes your
Fitbit experience and improves the accuracy of your calorie burn and distance
data. You can adjust your privacy settings on the Fitbit website to control
what information is shared with others.
4. Enter the email address for your Fitbit.com and your password.
5. Tap Set up Now.
6. Choose Flex.
7. Tap Start to begin searching for your Flex.
8. Once found, the lights on your Flex will begin to blink. Tap your Flex
repeatedly with your finger until it vibrates. If you have trouble finding your
Flex, click I don’t see lights blinking and follow the on-screen instructions for
further help.
9. Once the Fitbit App shows the message ‘You’re all set!’, you can tap Next to
continue.
NOTE: If you continue to experience trouble pairing your Flex, you can get
support for this and other questions at http://help.fitbit.com.
10. Tap Done to complete setup. You can now use the Fitbit App to start tracking.
Syncing to an iOS device
Your Flex can sync directly to supported iOS devices via Bluetooth. To check if your
iOS device is compatible with your Flex, see http://www.fitbit.com/devices.
NOTE: Bluetooth must be enabled both in the iOS device Settings, as well as within
the Fitbit App. You can turn Bluetooth on in the Fitbit app by tapping More,
then Devices, and switching Bluetooth to On.
Syncing occurs automatically when you open the Fitbit App on your iOS device.