Instructions / Assembly

105

85-1

Get to know your

New Exercise Bike

Assembly Instructions

Continued

STEP#7 Install Desk Assembly to bike frame

 Locate and remove 2 handlebar mounting bolts

(05) with washers (07,06) in bike main frame.

 Place Desk over bike main frame and install the 2

bolts with washers in to threaded holes as shown

to right.

 Tighten with 5mm hex wrench to a snug fit. Do

NOT over tighten

 Connect Meter wire (92) to wire from frame

STEP#9 Assemble Massage Bar Arm Rests

 Bolt Massage Bar (80) to Desk using Knob Bolts (85-1)

 Massage Bar (80) can be set in 3 positions above Horizontal. Choose a desired height.

Align each Support Arm in same position on each side. Tighten Knob Bolt (85-1)

3 position armrest height adjustment

STEP#6 Install Meter Holder to bottom of desk

 Slide Meter Holder (105) and meter wire

through opening in top center

 Install and tighten 2 screws (91) through

Meter Holder (105)

 Slide Meter (97) on to Meter Holder (105) and

plug meter wire in to back of meter

STEP#8 Install Drawer to Desk

 Align and Slide Drawer Assembly to

Desk Rails located on bottom of

Desk.

 Push Drawer Assembly through to

rider side with Drawer Handle