Installation Guide

11
102
05
07
101
68
70
69
72
67
66
104
Get to know your
New Exercise Bike
Assembly Instructions
Continued
STEP#5 Install Resistance Bands
 Place one RB (102) Handle through opening here:
 Place Tube in metal loop
 Hang handles on Resistance Band Holder
Step#3 Install Saddle Tube and Saddle
 Install Saddle Tube Adjuster Knob (104)
 Assemble Saddle (98) to Seat Tube (66) using Nut (100) and Washer (99)
 Note: FitDesk® is supplied with optional saddle height extender (71) for increased
leg extension if needed. Recommended for use if taller than 5’9” / 175cm
 Height is adjusted using Knob (104). You do not
have to remove to adjust. Loosen and
Pull – retighten.
STEP#4 Install Saddle Back
 Mount Saddle Back Assembly (67) to
Saddle Post (66) with Carriage Bolt (68),
Nuts (70), Washers (69)
 Choose High or Low Position and Mount
Saddle Back Cushion (101) to Saddle Back
(72) using bolt (05) and washer (07).
Step#3
Step#4
Step#5