User Manual

ASSEMBLY

Step 1: Install the

Rear Stabilizer (I) to

the Main Frame (K).

Be sure to tighten it

securely. Figure 1

Note: The Rear

Stabilizer (I) has

transport wheels.

Note: Most of the

mounting hardware

is pre-installed for

easy matching

during assembly.

Step 4: Using the supplied Wrenches (BB1) (BB2) attach the Left Pedal (B)

(106L) to the crank arm by tightening the pedal and holding the back nut at

the same time. Figure 4

Step 5: The Right Pedal (B) (106R) is installed the same way using the

supplied wrenches. (BB1) (BB2). Figure 5

WARNING: Make sure the pedals are threaded properly to ensure you do

not damage the threads.

Note: The Pedals must be made extra tight. Use the included Wrenches or

a 15mm wrench to finish tightening.

Step 2: Install the Front Stabilizer (J) to the Main

Frame (K). Be sure to tighten it securely. Figure 2

Note: Check Base Stabilizers for tightness periodically.

FIGURE 2

FIGURE 3

FIGURE 4

DETAIL

Step 3: Unlock the

Main Frame (K) to the

open position by pulling

the Frame Lock Pin

while pushing lightly

with your foot on the

stabilizer, then release

the Frame Lock Pin.

Figure 3

BB2

FIGURE 5

BB1

BB2

FIGURE 1