Installation Guide

SET UP / STORAGE
15
This model FitDesk
®
uses a quick release frame unlock design.
As a safety precaution please use the technique shown here when opening and closing
frame.
Figure 1. TO OPEN: Pull pin on frame support while placing foot on base.
Open frame then release pin, then pull desk toward you.
Figure 2. TO CLOSE:
1. Remove any items on desk.
2. Put foot on base, pull pin and close frame folding desk in.
NOTE: Frame is locked when PULL PIN clicks into place.
FIGURE 1
OPEN
FIGURE 2
CLOSE
B
FIGURE 1 OPEN
FIGURE 2 CLOSE
Before transporting. Fold frame in closed position with support pin engaged to prevent opening.
Tighten desk knobs. Use transport wheels when possible. The frame must be in the closed and
locked position prior to transport.
Place Feet As Marked