Pebble™ Getting Started Guide
This Getting Started Guide covers the following information: 1. Pebble Display 2. Wearing the P ebble 3. Pebble Battery 4. Syncing Pebble Data 5. Using the ActiLink 6. Using the ActiScale 7.
Pebble Display To show daily progress anytime Quickly tap device 5 times 1. Device status 2. Activity s tatus 3.
Wearing the Pebble All-day activity and walking Running, elliptical, and biking Good accuracy - clip on belt/waistband, pocket or bra Best accuracy - clip flat on top of shoes Note: Pebble must be secure 4
Pebble Battery Pebble includes CR2032 battery CR 2032 + Red lights = less than 2 weeks of battery life remaining An extra battery is included for convenience Replacing the battery 1. Turn clip counterclockwise 2. CR 2032 + Remove battery door 3. Use tool or device clip to remove old battery Wait 60 seconds CR 2032 CR 2032 4. CR 2032 + Insert new battery under tab 5.
Syncing Pebble Data The Pebble will sync data with your website when it is “awake” and near a wireless access point To wake the Pebble and sync activity data BP BP Tap device 5 times near an access point Walk near an access point OR 6
Using the ActiLink BP Insert ActiLink 2. BP 1. 100% Download and install software ActiLink status BP 3.
Using the ActiScale 1. 3. Place on flat, hard surface up to 50 feet from ActiLink Tap the scale Wait for “0.0” 4. Weight wirelessly sent to computer BP Stand on scale until weight is displayed 2. 175 lbs.
Using the ActiPressure 1. Place on flat surface up to 50 feet from ActiLink 2.
For more information regarding use, care, or servicing, please contact: Use of this product is subject to the FitLinxx End User License Agreement (EULA): http://www.fitlinxx.net/terms.htm This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operations.
