User's Manual

Table Of Contents

CSAFE BODYLAN MODULE DOC #: 930-00003-01 REVISION: 01

1 User Guide

1.1 Introduction:

The CSAFE BodyLan Module (CBM) provides wireless communication between a CSAFE equipped

fitness equipment and the Local Acess Point or Remote Acess Point. Included with a CBM is a 12 inch

flat data cable.

1. Installation:

Installaton and Serviceing is only to be performed by a qualified

technician trained by FitLinxx in the installation of this module.

1. Locate the CSAFE port on the fitness equipment console.

2. The CBM needs to be placed near the CSAFE port and just below the top of the equipments

console

3. With a cleaning solvent clean the area on the console where the CBM is going to be placed.

4. On the back of the CBM, peel off the protective cover of the Velcro adhesive and attach it to the

console.

5. Insert the small connector end of the data cable into the CBM and the larger end connector into

the CSAFE port on the console.